Eclipse CD7200 mkII Reference Manual page 38

For your safety in using the C07200 mk LI
Pour trouver les precautions de securite en fran"a,s, reportez-vous
a
la page 40.
Para una descnpclon en espanol concernlente con las precauclones de segundad, refierase a la pag 42
&
Warning
Please read all malenals such as
manuals and warranties that have come with the product
Eclipse will not be liability for unsatisfactory product perlormance due to failure to follow these instructions
Warnings and caul10n signs dluslrated below are posted throughout thIs manuai as weU as on the CD7200 mkU
They show safe and correct ways to handle the product so as 10 prevent personal InJury to you others and to
avoid property damage
Before readmg through the manual take lime to read through and learn the Important Informahon hsted
In
this
section.
• Do not modify thiS system for use other than that speCifIed herem Also. do not deviate from the
InstallatIOn procedures described herem. Edlpse Will not
be
held liable for damages Including. but not
limited to serious InJury. death or property damage resulting from Installaltons that enable unmtended
operation
• ThiS maIO unit requires 12V DC and should only be mstalled in a vehicle with a 12V negative ground
electrical system. Any other Installation may cause a fire or other severe damage to the maIO unit and
the vehicle
• Never IOstali thiS main umt where it Will Interlere wIth safe operation of the vehicle Never block the
dnvers' View Do not Install main Unit where It may mtenere with aperallOn of the brakes, the steeflng
or any safety main unit. including seat belts and aIr bags
• Before drlllrng holes
In
a vehicle for mstallatlon. you must confirm the locations of pipes, tanks
electncal wmng and other vehicle systems and components to ensure that there Will be no Interference
or contact In addition. you must also apply rust preventIOn and leak prevention measures at the dnlhng
area OtherwIse. fire or eleetnc shock could occur
• When installmg maIO unit do not remove or alter eXisting vehicle fasteners. rncluding nuts. bolts.
screws. clips, and fittrngs. Never detach. move or alter eXlstmg vehicle wiring ,"eludrng electrical
grounds and straps Alteration of eXisting vehicle components may make vehicle unsafe to operate
• Before InstallatIOn. remove the negative (-) battery terminal to prevent shocks. electrrcal arcrng fires
and damage to vehicle winng and the maIO Unit you are mstalilng
• Secure wiring with tape or plastic hes so that wires do not IOterfere with vehicle operation. IncludlOg
brake pedal gear shifter and steering POSition wires so Ihatthey wI! not be rubbed. abraded or
damaged by movlOg vehicle components, includmg power seats
• To alJold main unit and vehicle damage mcludlOg fire never supply power to Installed maIO umt In a
way whIch Will overload the capacity of an eXisting vehicle CirCUit Never leave a power supply wire or
connechon unlOsulated Always Install supplied fuses. CIrcUli breakers, and relays
J
&,waming
• Air bags are Vital safety maIO Unit Never Install main unit In a way which Will alter air bag wlnng or
Interfere with air bag deployment Air bags must funchon properly 10 the event of an aCCIdent
• When installation IS complete, test all vehicle electrical systems for proper operation including ltghts.
horn, brake lights. and emergency flashers
• For
your protection, never use a power drill Without safety glasses or goggles DebriS or broken drrll
bits may cause severe eye Injuries, mciudlOg blindness
• Use electrical tape to IOsulate the ends of all wires. even If not used. Proper Insulation prevents arcs,
shocks and fires
• Some maIO unit uses battenes Never Install maIO unit where young children can get access to
baltenes If a battery IS swallowed seek medical attentton Immediately
• When vehlde is moVIng. never take your eyes off the road to make adjustments to the main unit You
must pay attention to the road to aVOid accidents. do not let the operation or adjustment of the main
uOll dIstract you from proper vehicle operatIOn
• The dnver should not look at the screen while drivlOg ACCidents may result If you are nol paying
atlention to the forward direction
• Do not put foreign objects 10 the loading slOI of diSC
or
USB Input terminal Fires or shocks may result
• Do not disassemble or alter thiS main unIt ACCidents, fires or shocks may result
• Do not tel water or foreIgn objects enter the mternal parts of thiS main Unit Smoke, fires or shocks may
result
• Pay attention to where the remote control IS left, Trattic actidents or problems With dnVlng may result
If the remote control makes Its way under the foot pedals etc when the vehicle IS stopped or when It
goes around a comer
• 00 not use when It IS broken (the screen IS not ht or no sound comes out). ACCidents. fires or shocks
may result
• Always replace fuses with fuses of Identical capacIty and charactenstics Never use a high capacity
fuse than the anginal USlOg the wrong type of fuse may cause a fire or severe damage
• If foreign Objects or water enters the main Unit. smoke comes out, or there IS a strange odor. stop uSing
It Immediately, and contact your dealer ACCidents. fires, or shocks may result If you continue to use it
In these conditions
• The dnver should not change the
CD
or USB memory while driVing As aCCidents may result If you are
not paymg attention to the forward direction, first stop the car at a safe localton and then proceed
• PlastiC bags and wrappings may cause suffocation and death Keep away from babies and children
Never put bag over your head or mouth
ThIS SI90 Indicates a situation
in
which Incorrect handling or disregard of this sign
might result
in
death or
serioUS
personal injury
This S190 indIcates a situation In which incorrect handling or disregard of thiS SIgn
might result
in
personal injury or may result solely
In
damage to property
&warning
&Caution
I