Using The Wan Configuration Settings - Zoom ADSL X6 User Manual

Settings
Backup/Restore
Config
Using the WAN Configuration
Settings
When do I need the WAN Configuration page?
The WAN Configuration page contains critical information about
your Wide Area Network (WAN), ADSL setup, and Internet
access. Some of these values are provided by your ISP/DSL
provider and need to be entered on this page. To determine if you
need to add other values, read the table descriptions that follow the
picture. Note that Protocol, Encapsulation, VPI, VCI, PPP, and
NAT also appear on the Basic Setup page. Most likely you have
already entered values for these settings and only need the WAN
Configuration page for setting up an advanced feature such as
enabling a disconnect timeout on your PPP connection.
50
the factory defaults.
Save your current configuration settings so
that they may be restored at a later time.
ADSL X6 User Guide