Zoom ADSL X6 User Manual page 47

This button... Opens a page that lets you...
Firewall Define an additional layer of security for the
computers in your network. For example, if you
create a DMZ interface using the Virtual
Server/DMZ page (see below), you can enable
the firewall filtering and add a security policy that
blocks certain protocols from reaching the DMZ
machine.
ADSL Adjust the ADSL settings on your modem.
Configuration Typically, you do not need to change these ADSL
settings unless instructed by your service
provider.
Ethernet View and change the settings on the Ethernet
Configuration ports on your
change these settings.
DNS Allows you to specify multiple DNS servers.
Typically, most users do not need to enter a DNS
server unless instructed by their ISP.
LAN
Specify the settings that control the connection
Configuration between the
Set a fixed IP address for your computer.
Routing Table Set up the routes on which you want the X6 to
send data that it receives on a particular interface,
such as a LAN or Ethernet interface. Routes
specify the IP address of the next device,
interface, or Internet destination to forward data
to, based on the ultimate destination of the data.
Virtual Open access to your computer by creating a
Server/DMZ virtual server or a DMZ (Demilitarized Zone). By
default, your modem uses NAT (Network Address
Translation) to hide your networked computers
from users on the Internet. However, there are
times when you may want to give outside access
to the computers in your network. If so, you can
set up a virtual server or DMZ to allow outside
users access to a computer on your network. You
may want to allow access, for example, if a LAN
computer is hosting Internet games or running a
Web server.
Chapter 5: Using Advanced Setup
. Typically you should not need to
X6
modem and your Ethernet jack.
X6
47