To Connect A Network Device - Zoom ADSL X6 User Manual

3
Turn on the computer.
4
Verify that your Internet connection is working. Open your
Web browser (for instance, Internet Explorer or Netscape
Navigator) and try to connect to a familiar Web address.
5
Repeat steps 1–4 for each computer you want to add.

To Connect a Network Device

You can use one of the LAN ports on the
device (for example, a hub, switch, or router).
1
Plug one end of an Ethernet cable into one of the modem's
LAN ports and the other end into the network device's
Ethernet port. (For a hub or a switch, this is typically called an
Uplink or Expansion port. For a router, this is typically called
a WAN port.)
2
Set up your network. Refer to the documentation provided
with your particular network device for instructions on how to
do this.
3
Once your network is set up, reboot any computer that is part
of the network.
4
Verify that your Internet connection is working. Open the
Web browser (for instance, Internet Explorer or Netscape
Navigator) on each computer and try to connect to a familiar
Web address.
Congratulations! You have set up your wired devices. If you
have wireless devices that you want to add to your network, go to
Setting Up Your Wireless Network on page 20.
18
to plug in a network
X6
ADSL X6 User Guide