Contents Congratulations! You are in control of one of the easiest-to-use thermostats on the market today. This thermostat has been designed to provide you with years of reliable performance and comfort control. 4 Additional Operation Features 1 About Your Thermostat Auto Changeover Mode ........
® Outdoor Temperature Indicator..Displays along with the outdoor temperature reading (see note below) Battery Compartment ....Located in the back of thermostat NOTE: If a Braeburn outdoor sensor was connected you can view the outdoor temperature by pressing the ®...
Table of User Options 2 Setting User Options NOTE: A detailed description of each User Option follows this table. Advanced User Options No. User Options Factory Setting Comments Default Options User options allow you to customize some of your thermostat’s features. The default user options are Filter Service Disables filter service monitor feature.
Service Monitors Thermostat Lock Code (Filter, UV and Humidifier Pad) User Option 5 User Options 1, 2 and 3 The Thermostat Lock Code sets a 3-digit code that you may use at any time to lock or unlock the thermostat. Setting the code in the user options mode does not activate the lock feature (See Locking/Unlocking Thermostat, There are three user selectable service monitors that will display page 15).
Setting the FAN Control Mode Setting the Temperature SpeedBar INSTRUCTIONS Temperature Adjustment – Press the SpeedBar up or The Fan Control has 2 modes of operation – AUTO and ON. The mode can be selected by pressing the ® button to scroll through the different modes. down to adjust the current set temperature.
INST Resetting the Thermostat 4 Additional Operation Features INSTRUCTIONS This thermostat provides you with a reset button that will erase all of your user settings. The reset feature does not Auto Changeover Mode affect the Installer Settings. Auto Changeover mode is a feature enabled/disabled in the Installer Settings (see Installer Manual).
Compressor Protection Locking and Unlocking the Thermostat Compressor protection is enabled/disabled in the Installer Settings (See Installer Manual). If enabled, this Your 3-digit Lock Code is set in the “User Options” portion feature is automatically present in cooling and/or heating (heat pump only) modes. of this manual (See “Setting User Options”, page 7 and 9).
Installer Settings (See Installer Manual). If a Braeburn indoor remote sensor was installed and properly configured in the Installer Settings, the thermostat will sense temperature at a remote location or at a combination of a remote location and the thermostat location.
Never spray any liquid directly on the thermostat. Using a soft damp cloth wipe the outer body of the thermostat. Never use any abrasive cleansers to clean your thermostat. If a Braeburn outdoor remote sensor was installed you may press the BACK and NEXT buttons at the same time Changing the Batteries to view the outdoor temperature.