Moving The Boiler; Moving The Boiler With Boiler Cart - Buderus Logano G334 X Installation And Maintenance Instructions Manual

5

Moving the boiler

5 Moving the boiler
This chapter describes how to move the boiler safely,
SYSTEM DAMAGE
due to bumps.
Check the transport diagrams on the
CAUTION!
packaging to protect the sensitive
components from damage by bumping.
USER NOTE
Protect the boiler connections from dirt
if the boiler is not installed immediately.
USER NOTE
Dispose of the packaging material in an
environmentally compatible fashion.
5.1

Moving the boiler with boiler cart

The boiler must be fully packed for transport to the
installation location.
Remove the straps and the cardboard packaging.
Remove the bolts from the pallet.
Lift the boiler at the sides and slide to the edge of the
pallet. Place a pipe under the boiler (Fig. 4) and roll it
on additional pipes to the installation location.
Place the boiler in its final position.
USER NOTE
Make sure that all sheet metal parts, pipe
connections, burners and the controller
are protected during transport.
Never lift the boiler by these parts.
RISK OF INJURY
if the boiler is not properly secured to the
trolley.
CAUTION!
Use suitable transport equipment, such
as a trolley with a belt.
Secure the boiler to prevent it from
falling.
10 Installation and maintenance instructions Logano G334 X gas-fired boiler • Issue 09/2005
Fig. 4 Moving the boiler
We reserve the right to make any changes due to technical modifications.