Moving The Boiler; Moving The Boiler With Boiler Cart - Buderus Logano G124X II/SP Installation And Maintenance Instructions Manual

5

Moving the boiler

5 Moving the boiler
This chapter describes how to move the boiler safely,
SYSTEM DAMAGE
due to bumps.
Check the transport diagrams on the
CAUTION!
packaging to protect the sensitive
components from damage by bumping.
USER NOTE
Protect the boiler connections from dirt
if the boiler is not installed immediately.
USER NOTE
Dispose of the packaging material in an
environmentally compatible fashion.
5.1

Moving the boiler with boiler cart

Move the boiler with packaging and on pallet as much as
possible.
RISK OF INJURY
if the boiler is not properly secured to the
trolley.
CAUTION!
Use suitable transport equipment, such
as a boiler cart with a belt.
Secure the boiler to prevent it from
falling.
Position transport equipment (e.g. boiler cart) at the
back of the boiler.
Secure boiler to cart.
Move the boiler to the installation location.
Remove the straps and the cardboard packaging.
Remove the bolts from the pallet.
Lift the boiler at the sides and slide to the edge of the
pallet. Place a pipe under the boiler and roll it on
additional pipes to the installation location.
Place the boiler in its final position.
10 Installation and maintenance instructions Logano G124X II/SP special gas-fired boiler • Issue 04/2005
Fig. 5 Moving boiler with boiler cart
Fig. 6 Moving the boiler
We reserve the right to make any changes due to technical modifications.