Keystone Button - Christie LX1000 User Manual

Basic Operation
SHUTTER button
See page 27 for details.
FILTER button
Press and hold the FILTER button for more than five
seconds to replace the filter mechanically. See page 51
for details.
Note:
IMAGE ADJ. button
Press the IMAGE ADJ. button on the remote control to
adjust a image level of the screen.
For more detail, see pp.45-47 .
IMAGE SEL. button
Press the IMAGE SEL. button on the remote control to
select a desired image level of the screen.
For more detail, see pp.38, 42.
P-TIMER button
Press the P-TIMER button on the remote control. The
Timer display "00 : 00" appears on the screen and starts
to count time (00 : 00–59 : 59).
To stop the P-TIMER, press the P-TIMER button.
To cancel the P-TIMER, press the P-TIMER button again.

KEYSTONE button

Press the KEYSTONE button on the remote control. The
"Keystone" appears on the screen.
Use the Point
distortion. The keystone adjustment can be stored
(pp.40, 44).
Reduce the upper width with
Point button.
30
buttons to correct keystone
Reduce the lower width
with Point button.
Remote Control
P-TIMER
button
FILTER
button
Note:
P-Timer display
control again while the Keystone dialog box is being
displayed, the keystone adjustment will be canceled.
input signal.
Reduce the left part with
Point button.
SHUTTER
button
IMAGE ADJ.
button
KEYSTONE
button
IMAGE SEL.
button
Reduce the right part with
Point button.
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)