Installing The Projector In Proper Directions - Christie LX1000 User Manual

Installing the Projector in Proper Directions

Use the projector properly in specified positions. Improper positioning may reduce the lamp life and result in
severe accident or fire hazard.
This projector can project the picture in upward, downward, or inclined position in perpendicular direction to the
horizontal plane.
Note:
Positioning Precautions
Avoid positioning the projector as described below when installing.
10˚
10˚
CAUTION ON CEILING MOUNTING
For ceiling mounting, you need the ceiling mount kit designed for this projector. When not mounted
properly, the projector may fall, causing hazards or injury. For details, consult your dealer. The warranty
on this projector does not cover any damage caused by use of any non-recommended ceiling mount kit
or installation of the ceiling mount kit in an improper location.
LX1000 User Manual
020-000141-01 Rev. 1 (05-2009)
Do not roll the projector more
than 10 degrees from side to
side.
Do not put the projector
on either side to project an
image.
Safety Instructions
10˚ 10˚
In upward projection, do
not tilt the projector over 10
degrees right and left.
In downward projection, do
not tilt the projector over 10
degrees right and left.
10˚ 10˚
7