Keystone Button - Christie LX650 User Manual

FILTER button
Press and hold the FILTER button for more than five seconds
to operate electrically operated filter to replace the filter.
NO SHOW button
Press the NO SHOW button on the remote control to black
out the image. To restore to normal, press the NO SHOW
button again or press any other button.
"No show" disappears after 4 seconds.
MOUSE POINTER button
Move the pointer on the screen with this button.
POINTER button
Press POINTER button on the remote control to display the
Pointer on the screen.
P-TIMER button
Press the P-TIMER button on the remote control. The Timer
display "00 : 00" appears on the screen and starts to count
time (00 : 00–59 : 59).
To stop the P-TIMER, press the P-TIMER button.
To cancel the P-TIMER, press the P-TIMER button again.

KEySTONE button

Press the KEYSTONE button on the remote control. The
"Keystone" appears on the screen.
Use the Point ed7 8 buttons to correct keystone
distortion. The keystone adjustment can be stored (pp.40,
44).
Reduce the upper width with
Point button.
e
Reduce the lower width
with Point button.
d
Remote Control
P-TIMER
button
FILTER
button
✔ Note:
• See the previous page for the
description of other buttons.
P-Timer display
• The white arrows indicate that there is no correction.
• A red arrow indicates the direction of correction.
• An arrow disappears at the maximum correction.
• If you press the KEYSTONE button on the remote
control again while the Keystone dialog box is being
displayed, the keystone adjustment will be canceled.
• "Keystone" disappears after 10 seconds.
Reduce the left part with
Point button.
7
Basic Operation
MOUSE
POINTER
button
POINTER
button
KEySTONE
button
NO SHOW
button
Reduce the right part with
Point button.
8
29