Self-Test Procedure - Avaya H323 Installation Manual

Ip office release 6

Hide thumbs Also See for H323:

Table of Contents

4.4 Self-Test Procedure

1. To start the IP phone self-test procedures, press the following sequence: MUTE 8 3 7 8 # (MUTE T E S T #). The

phone does the following:

· Each column of programmable button LED's is lit for half a second from left to right across the phone, in a

repeating cycle. The Speaker/Mute LED and the message waiting LED are also lit in sequence.

· Buttons (other than #) generate a click if pressed.

· Phones with displays show Self test #=end for 1 second after self-test is started. Then a block character (all

pixels on) is displayed in all display character locations for 5 seconds. Display of the block character is used to

find bad display pixels.

2. One of the following is finally displayed:

· If self-test passes:

Self test passed

#=end

· If self-test fails:

Self test failed

#=end

3. To end the self-test, press #. The phone returns to normal operation.

H323 IP Telephone Installation

IP Office Release 6

Static Administration Options: View Details

15-601046 Issue 16a (15 March 2010)

Page 57

Table of Contents