Blocking Channels; Unlocking Programs Temporarily; Using The Input Lock Feature - Toshiba 22AV500U Owner's Manual

Chapter 6: Using the TV's features
Blocking channels
With the Channels Block feature, you can block specific
channels. You will not be able to tune blocked channels unless
you unlock them.
Unlocking programs temporarily
If you try to tune the TV to a program that exceeds the rating
limits you set, the TV will enter program lock mode and the
following message will appear on-screen:
To block channels:
Press ....... to highlight the channel you want to block
and press @, which puts an "X" in the box next to that
channel.
Description Mode
ThiS program exceeds the rating limit you set.
Push 'MUTE' to enter PIN.
2
3
4
You can either temporarily unlock the program or select an
unlocked program to watch.
You can use the Input Lock feature to lock the video inputs
(VIDEO, ColorStream HD, HDMI1, HDMI2
and
PC)
and
channels 3 and 4. You will not be able to view the input sources
or channels until you unlock the inputs.
To temporarily unlock the program:
Using the input lock feature
To lock/unlock the video inputs:
1
From the
locks
menu, Press .... to display the PIN code
entering screen.
Enter your four-digit PIN code and press
@.
Press to highlight
Input lock
and press
~.
Press or .... to select the level of video input locking
you prefer, as described below.
1
Press
Mer
2
Enter your four-digit PIN code and press
@.
If the correct
code is entered, the program lock mode is released and
the normal picture appears. All locking is disabled until
the TV is turned off, and will be enabled when the TV is
turned on again.
Allow All
Block All
Cancel
Dono
"0
o
o
o
o
o
o
o
o
.. 0
10
Channels Block
Locks
Enable Rating Blocking Off
Edit Rating Limits
ChannaIs Block
Input Lock Off
Contont Panel Lock Off
GameTimer Off
New PIN Code
Press
M8
u
and highlight the
locks
menu icon.
Press .... to display the PIN code entering screen.
Enter your four-digit PIN code and press @
(1&
page 45).
Press .... to highlight
Channels Block
and then press @
. A list of the channels available for that input will be
displayed along with the call letters for each channel, if
available.
5
4
1
2
3
6
Repeat step 5 for other channels you want to block.
7
Highlight
Done
and press
@.
Video
Locks VIDEO,
ColorStream HO, HDMI I,
HDMI 2, and Pc.
To unblock individual channels:
In step 5 above, press'" .... to highlight the channel you want
to unblock, press @ to remove the "X" from the box, highlight
Done
and press @.
Video+
Locks VIDEO, ColorStream HD,
HDMI I, HOMI 2, PC and channels 3
and4.
• Select
Video+
if you play video
tapes via an ANT/CABLE input.
To block all channels at once:
Highlight
Block All
in step 5 on previous page and then
highlight
Done
and press @.
5
Off
Press@.
Unlocks all video inputs and channels
3 and 4.
To unblock all locked channels at once:
Highlight
Allow All
in step 5 on previous page and then
highlight
Done
and press
@.
47
I