Table of Contents
Advertisement
ERROR MESSAGE
4 DIGITS MINIMUM
5 BARCODE LIMIT
5 BLOCK LIMIT
10 LINE LIMIT
30 CHARACTER
LIMIT
BARCODE MUST
START & END WITH
A, B, C OR D
ERROR MESSAGE LIST
CAUSE
This message appears if less than
the minimum four digits are
entered as the barcode data.
This message appears if five bar-
codes already exist when you
Barcode
press
.
This message appears if five blocks
already exist when you hold down
and press
new block or when you try to add
currency conversion text.
This message appears if ten lines
have already been entered in a
block of text when you press
or try to add currency
New Block
conversion text.
This message appears if you press
to delete text, causing the
Clear
number of lines in a block to
exceed the ten-line limit.
This message appears if more than
30 characters are selected when
Copy
you press
.
&Paste
This message appears if A, B, C or
D has not been entered at the
beginning and end of a barcode
with the CODABAR protocol.
to add a
New Block
ERROR MESSAGE LIST
SOLUTION
Enter a minimum of four
digits before pressing
.
New Block
Limit the number of bar-
codes in the text to five.
Limit the number of blocks
in the text to five.
Limit the number of lines
in the text block to ten or
hold down
and press
to create a new
New Block
block.
Adjust the number of lines
so that the block will not
have more than ten lines.
Limit the number of char-
acters that will be copied
and pasted to 30.
Enter A, B, C or D at the
beginning and end of the
barcode.
81
Advertisement
Table of Contents
