Brother P-touch 9400 User Manual page 93

ERROR MESSAGE LIST
ERROR MESSAGE
LENGTH LIMIT
LIMIT EXCEEDED
SET BETWEEN
4.0-30.0 cm
LIMIT REACHED
84
CAUSE
This message appears if you try to
paste in text or add a character, a
space, a new block, a symbol, a
diacritical mark, an accented char-
acter, a barcode, currency conver-
sion text or a frame/shading,
causing the text to exceed the 1.2-
metre limit.
This message appears if you press
after changing a label for-
New Block
mat function on the FORMAT
menu, or press Font ,
Style
Italic / Vert
, , or , causing
the text to exceed the 1.2-metre
limit.
This message appears if you try to
print using the NUMBER (number-
ing) function, causing the text to
exceed the 1.2-metre limit.
This message appears if you press
to delete text, causing the
Clear
text to exceed the 1.2-metre limit.
This message appears if you try to
recall a text file from the memory,
causing the text to exceed the 1.2-
metre limit.
This message appears if the set
label length (LENGTH function on
the FORMAT menu) is not within
the range 4.0 to 30.0 cm.
This message appears if you try to
add more than 50 underlines,
frames and shadings.
Delete some of the text or
reduce the character size
before trying to add more
text.
Delete some of the text
before trying to change the
label or text formats.
Size , Width ,
Delete some of the text or
reduce the character size.
Delete some of the text or
reduce the character size.
Delete some of the text
before recalling it.
Type in a label length that
is within the specified
range.
Limit the number of under-
lines, frames and shadings
in the text to 50.
SOLUTION