Table of Contents
Advertisement
Ch. 3 Functions
G Press
until 9 moves beside the
or
desired setting.
For a label created using a template other
than one from the STAMP category:
To print, select OK. Refer to page 64 for
more details on printing.
To change the printing options, select
OPTION. Refer to pages 65 through 69
for more details on the printing options.
For a stamp created using a template from
the STAMP category:
To print out a stamp stencil, select
PRINT STAMP.
To print an identification label, select
PRINT LABEL.
NOTE
Use 12-mm-wide tape to make an identification
label for a stamp with a STAMP M size and use 18-
mm-wide tape to make a label for a stamp with a
STAMP L size.
H Press
.
New Block
To store the label or stamp created using a tem-
plate:
I Press
or
FILE.
J Press
.
New Block
Caps
Alt Template Zoom
[ ]:CONFIRM
FILE
NEW
SAVE AS
SAVE
A
Style
60
until 9 moves beside
Back
Half
ground
Cut
36mm
24mm
18mm
12mm
9mm
6mm
Italic Vertical
K Press
until 9 moves beside the
or
desired setting, and then press
Refer to pages 61 and 62 for more details
on saving files.
If the file has not been saved before, select
SAVE AS.
Caps
Alt Template Zoom
FILE DESCRIPTION
0:
A
Style
If the file has been saved before, select
SAVE.
Caps
Alt Template Zoom
FILE DESCRIPTION
0: Address
A
Style
L Type in the desired file name.
NOTE
A file name can only be up to 10 characters long.
M Press
. The text is saved under the
New Block
selected number with the entered file name.
To create another label or stamp using a differ-
ent template:
N Press
or
FILE.
New Block
Back
Half
ground
Cut
36mm
24mm
18mm
12mm
9mm
6mm
Italic Vertical
Back
Half
ground
Cut
36mm
24mm
18mm
12mm
9mm
6mm
Italic Vertical
until 9 moves beside
.
Advertisement
Table of Contents
