Table of Contents
Advertisement
Templt
Template (
)
The Template function makes creating a label or
stamp quick and easy. After selecting one of the
various pre-formatted templates, simply change
the text, and then it is ready to be printed. The
many templates available are useful for com-
—
mon needs
from addressing envelopes to
identifying floppy disks or audio and video cas-
settes. The tape width and length of each label
printed from a template is preset. Refer to the
samples of the available templates on pages 103
to 106.
After the text is entered, the style of the text can
easily be changed just by selecting one of the 7
available style formats. Refer to page 107 for
samples of the style formats.
To create a label or stamp from a template:
1 Press
Templt
. The Template indicator lights
up.
NOTE
If there was text in the display when the Tem-
plate function was started, the message "OK TO
CLEAR TEXT BUFFER?" appears.
To delete the text, press
moves beside OK, and then press
To return to the text without deleting it, press
Cancel
(or move 9 beside CANCEL, and then
press
).
New Block
To return to the previous screen, press
Caps
Alt Template Zoom
[ ]:CONFIRM
TEMPLATE
CATALOGUE NO.
ADDRESS
EQUIPMENT
PLATE
NAMEPLATE
A
Style
until 9
or
.
New Block
Cancel
.
Back
Half
ground
Cut
36mm
24mm
18mm
12mm
9mm
6mm
Italic Vertical
2 Select the desired template.
NOTE
To select the first template, press
(space bar) (or hold down
To select the last template, hold down
press
.
If CATALOGUE NO. was selected:
Type in a template number (or press
or
) until the desired template is
displayed. The name of the selected
template is shown in the second line at
the top of the display.
Caps
Alt Template Zoom
INPUT NO.
ADDRESS 1
A
Style
If a category was selected:
Press
or
plate is displayed. The number and
name of the current template are dis-
played at the top of the display and the
dimensions are shown below it.
Caps
Alt Template Zoom
1:ADDRESS 1
W 24mm×
A
Style
Ch. 3 Functions
and press
).
and
Back
Half
ground
Cut
36mm
1
24mm
18mm
12mm
9mm
6mm
Italic Vertical
until the desired tem-
Back
Half
ground
Cut
36mm
8.0cm
24mm
18mm
12mm
9mm
6mm
Italic Vertical
57
Advertisement
Table of Contents
