Table of Contents
Advertisement
TROUBLESHOOTING
(1) The display stays blank after you have
turned on the machine, or abnormal char-
acters are displayed.
(2) The text shown in the display cannot be
read.
(3) The machine does not print or the printed
characters are blurred.
(4) The text is printed on striped tape.
88
TROUBLESHOOTING
Problem
Solution
Check that the power supply cord is con-
nected.
Reset the machine by turning it off, and
while holding down
ing the machine back on.
The text and formats in the display and all
text files stored in the memory are erased.
Use the Zoom mode to zoom in on the
text. Refer to page 36.
Check that the tape cassette has been
inserted properly.
If the tape cassette is empty, replace it
with a new one.
Make sure that the tape compartment
cover has been closed.
You have reached the end of the tape in
the cassette. Replace it with a new one.
R
and
, turn-
Advertisement
Table of Contents
