Table of Contents
Advertisement
22 Service Search
3.1.2 Configuring DiSEqC 1.2 settings
Set the DiSEqC 1.0 option and the DiSEqC 1.1 option accord-
ing to your antenna configuration.
Your motorized antenna will turn toward your desired satel-
lites horizontally by DiSEqC 1.2.
To get the correct position of your desired satellite, take the
For example, to select the antenna con-
nected to the A5 input in the left figure, set
the DiSEqC 1.1 option to 2 of 4 and the DiS-
EqC 1.0 option to 1 of 4. If you have a mini
DiSEqC 1.0 switch which has only two in-
puts, you should set the DiSEqC 1.0 option
to Mini A instead of 1 of 4.
When you switch to a service, if it is not
provided by the current satellite, it will take
longer time than usual because the antenna
has to turn to its position.
To use the DiSEqC 1.2 protocol,
select the Installation > Motor-
ized DiSEqC 1.2 menu.
should see a screen like the left
figure. At first you have to set the
Motorized DiSEqC 1.2 option to
Enable.
You
Advertisement
Table of Contents
