Table of Contents
Advertisement
36 Preference Settings
4.2.5 Audio mode
ently depending on the setting of the VCR SCART Type op-
tion. If the option is set to Standard, the digital receiver will
pass along the video from the video device to your television
when it starts playback. But if the option is set to External A/V,
the digital receiver will not pass the video automatically. You
have to press the
ble for the digital receiver to record the video from the video
device since the digital receiver is just a bypass for the video
recorder.
NOTE
When the digital receiver is in standby mode, the digital re-
ceiver cannot pass the video from the video device to the
television when it starts playback.
Basically, there are two audio sources as you can find two audio
sockets on the back panel of the digital receiver. You can enjoy
only one source or both of them in either stereo or mono. Set
the Sound Mode option as you desire.
Apart from this setting, you can change the sound mode with
the
button. See
The digital receiver can output two types of digital audio sig-
nals via the S/PDIF output. One is an encoded signal, and the
other is a decoded signal. If you have the digital receiver linked
to your audio-video receiver via the S/PDIF output, you have
to set the Dolby Digital option to PCM, which means that the
digital receiver will output encoded Dolby Digital audio with-
out decoding so that your audio-video receiver can decode it.
Otherwise, set it to Bitstream, then the digital receiver will out-
put decoded Dolby Digital audio, scaling it down to two chan-
nels.
£
¢
¡
button to pass it along.
AUX
§5.2.4
for a detailed description.
It is impossi-
Advertisement
Table of Contents
