6.5 Editing channel data on your computer
You can edit the channel data on your computer by using a
channel editor software, Vega, which is available from Top-
field's website,
utility_list.asp.
6.5 Editing channel data on your computer 57
1. Plug one end of an RS-232 cable (9 pin
D-sub cable) into the RS-232 port on the
digital receiver, and the other end into
the matching port on the other digital re-
ceiver.
2. Turn on the source digital receiver.
3. Select the
Firmware > Transfer Data to Other IRD
menu, then you get asked for confirma-
tion; select Yes.
4. To start the data transfer, turn on the target digital re-
ceiver.
5. A progress bar appears showing the progress of the data
transfer.
6. Restart the target digital receiver when the data transfer
is complete.
http://www.i-topfield.com/eng/download/
Installation > Transfer
6