Configuring Diseqc 1.2 Settings - Topfield TF 5000 CI User Manual

4.1.2 Configuring DiSEqC 1.2 settings
Satellite Name option to specify a satellite that is not in the
satellite list, you might have to fill in the correct LNB fre-
quency. The absolute difference between a broadcasting fre-
quency and its LNB frequency must be within 950 to 2150
MHz. For example, if the frequency band of your desired
satellite ranges from 3660 to 4118 MHz, you have to set the
LNB Frequency option to 5150 MHz.
The LNB has to be supplied with power to operate. Set the
LNB Power option to On if it does not have any other power
supply.
You had better ignore the 22 kHz option.
The digital receiver is designed to be compatible with DiSEqC
(Digital Satellite Equipment Control) switches. It is possible
to connect several antennas to one digital receiver by DiSEqC
switches. A DiSEqC 1.0 switch allows switching between up
to 4 satellite sources and a DiSEqc 1.1 switch allows switching
between up to 16 satellite sources.
Set the DiSEqC 1.0 and DiSEqC 1.1 options according to your
antenna configuration.
Your motorized antenna will turn toward your desired satel-
lites horizontally by DiSEqC 1.2.
4.1 Searching broadcasting services 25
For example, to select the antenna con-
nected to the A5 input in the left fig-
ure, set the DiSEqC 1.1 option to 2 of
4 and the DiSEqC 1.0 option to 1 of 4.
If you have a mini DiSEqC 1.0 switch
which has only two inputs, you should
set the DiSEqC 1.0 option to Mini A in-
stead of 1 of 4.