Table of Contents
Advertisement
80 Firmware Update
9.2 From the firmware server via the Internet
5. Place the highlight bar on the right firmware file and
£
¢ ¡
press the
OK
on the front display of the digital receiver.
6. When the message of 'END' appears, restart the digital
receiver.
NOTE
Your memory stick must be formatted in the FAT file system.
Otherwise, the digital receiver cannot recognise your USB
memory. In addition, the digital receiver can only recognise
files and directories which are named with only alphabetic,
numeric and underscore letters. If there is a file or folder
named with other letters, the digital receiver cannot recog-
nise not only it but also its subsequent files and folders. And
if the receiver does not recognise your USB, please restart the
receiver with the USB memory stick plugged in.
You can update the firmware from the firmware server which
is being run by Topfield via the Internet. Make sure that the
digital receiver is connected to your router before configuring
the network settings on the digital receiver.
NOTE
For detailed description about how to set up the router, refer
to the manual of your router.
button, and a countdown will be displayed
Advertisement
Table of Contents
