Searching For Services - Topfield TF7750HDPVR User Manual

3.1.4 Searching for services

There are in general four service search methods:
Searching every service of a satellite
To search every service of a satellite, take the following steps:
With the Auto mode, the digital receiver tries to search every
service, relying on the transponder data which is stored at the
time of manufacture. It thus may happen to fail to search all ac-
tually available services since services are more often than not
launched, discontinued, or removed into another transponder.
3.1 Searching for broadcasting services 25
• searching every service of a satellite,
• searching every service of a transponder,
• searching single service of a transponder,
• searching every service of a SMATV (Satellite Master An-
tenna Television) system.
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Set the Search Mode option to Auto.
3. If you set the Network Search option to On, the digital
receiver will check up the up-to-date channel informa-
tion while searching services, but it takes a rather longer
time.
To perform a service search, se-
lect the Installation > Service
Search menu. You should see a
screen like the left figure.
3