A S SE MB LY ST E P
HARDWARE BAG CONTENTS :
SUPPORT BARS
10
BOLT (H)
15 mm
Qty: 8
top view
CONSOLE MAST
A Open HARDWARE BAG .
B Align SUPPORT BAR with holes
FLAT WASHER (J)
in CONSOLE MAST.
Qty: 8
C Insert 1 BOLT (H) and 1
WASHER (J) into each of the 4
holes of the SUPPORT BAR.
D Tighten all 4 BOLTS (H).
E Repeat for lower SUPPORT BAR.
FLAT WASHER (J)
BOLT (H)