Ipv6 Menu - Lexmark X548 Series User Manual

Menu item
Netmask
Gateway
Enable DHCP
On
Off
Enable RARP
On
Off
Enable BOOTP
On
Off
Enable AutoIP
Yes
No
Enable FTP/TFTP
Yes
No
Enable HTTP Server
Yes
No
WINS Server Address
Enable DDNS
Yes
No
Enable mDNS
Yes
No
DNS Server Address
Enable HTTPS
Yes
No

IPv6 menu

This menu is available from the Network/Ports menu:
Network/Ports > Standard Network or Network [x] > Standard Network Setup or Network [x] Setup > IPv6
Note: This menu is available only in network models or printers attached to print servers.
Description
Lets you view or change the current TCP/IP netmask
Lets you view or change the current TCP/IP gateway
Specifies the DHCP address and parameter assignment setting
Note: On is the factory default setting.
Specifies the RARP address assignment setting
Note: On is the factory default setting.
Specifies the BOOTP address assignment setting
Note: On is the factory default setting.
Specifies the Zero Configuration Networking setting
Note: Yes is the factory default setting.
Enables the built-in FTP server, which allows you to send files to the printer using File
Transfer Protocol.
Note: Yes is the factory default setting.
Enables the built-in web server (Embedded Web Server) to monitor and manage the
printer remotely using a web browser.
Note: Yes is the factory default setting.
Lets you view or change the current WINS server address
Lets you view or change the current DDNS setting
Note: Yes is the factory default setting.
Lets you view or change the current mDNS setting
Note: Yes is the factory default setting.
Lets you view or change the current DNS server address
Lets you view or change the current HTTPS setting
Note: Yes is the factory default setting.
Understanding printer menus
141