Table of Contents
Advertisement
3
2
4
5
Jam number Jam location
1
200
In the standard 250-sheet tray and manual
feeder (Tray 1)
2
201
Under the fuser
3
202
In the fuser
4
230
In the duplex
5
235
In the duplex
Note: This jam number indicates that the paper
being used for a duplex print job is not
supported.
6
24x
In the 550-sheet tray
7
250
In the multipurpose feeder
8
290-294
In the ADF
8
Clearing jams
7
Instructions
1
Open the front door. Inspect the area behind
the front door, and then remove any jams.
2
Open the fuser cover. Inspect the area under
the cover, and then remove any jams.
3
Close the front door.
4
Pull Tray 1 out. Inspect the tray area, and then
remove any jams.
5
Verify that the paper is loaded correctly.
6
Reinsert Tray 1.
1
Pull the 550-sheet tray out, and then remove
any jams.
2
Reinsert the tray.
1
Press the latch to the left to release the
multipurpose feeder.
2
Inspect the multipurpose feeder, and then
remove any jams.
3
Close the multipurpose feeder.
Note: You may need to open the 650-sheet duo tray
to remove jammed pages behind the multipurpose
feeder.
Open the ADF cover, and then remove the jam.
233
1
6
Advertisement
Table of Contents
Troubleshooting
