Lenovo ThinkServer RD230 Hardware Maintenance Manual page 54

Figure 19. Removing the filler
3. Touch the static-protective package that contains the new hard disk drive to any unpainted metal
surface on the server. Then, remove the hard disk drive from the package and place it on a
static-protective surface.
4. Make sure that the drive tray handle is in the open position.
5. Align the screw holes in both sides of the hard disk drive with the corresponding holes in the tray. Then,
install the screws to secure the hard disk drive in the tray.
48
ThinkServer RD230 Hardware Maintenance Manual