Lenovo ThinkServer RD230 Hardware Maintenance Manual page 115

Table 33. Submenu under the Intel VT-d Configuration
Item
Intel VT-d
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 34. Submenus under the Remote Access Configuration
Item
Remote Access
Note: The settings in [ ] are the default settings in the Setup Utility program.
Table 35. Items under the PCIPnP menu
Item
Clear NVRAM
Boots Graphic Adapter Priority
LAN1
LAN1 OP-ROM
LAN2
LAN2 OP-ROM
Note: The settings in [ ] are the default settings in the Setup Utility program.
Option
Disabled[Enabled]
Option
[Disabled]Enabled
Option
[No]Yes
[Auto]Onboard VGA
[Auto]EnabledDisabled
[Enabled]Disabled
[Auto]EnabledDisabled
[Enabled]Disabled
Description
Enable or disable the virtualization
technology for I/O devices.
Description
Enable or disable the serial port
remote access.
Description
If this option is set to Yes, that means
to clear the NVRAM information when
the system starts up.
If this option is set to Auto, the
external graphics card will be enabled
firstly. If no external graphics card,
the integrated graphics controller is
automatically enabled. If this option
is set to Onboard VGA, only the
integrated graphics card is enabled.
The Auto option means to
automatically enable the integrated
Ethernet controller 1. The Enabled
option means to enable the integrated
Ethernet controller 1. The Disabled
option means to disable the integrated
Ethernet controller 1.
Enable or disable the wake-up from
LAN 1.
The Auto option means to
automatically enable the integrated
Ethernet controller 2. The Enabled
option means to enable the integrated
Ethernet controller 2. The Disabled
option means to disable the integrated
Ethernet controller 2.
Enable or disable the wake-up from
LAN 2.
.
Chapter 7 Configuring the server
109