IBM System x3550 M3 Type 4254 Installation And User Manual page 118

10. Route the remote battery cable through the notches on the microprocessor 2
11. Connect the other end of the remote battery cable to the remote battery cable
12. Install the battery on the microprocessor 2 air baffle:
102
IBM System x3550 M3 Types 4254 and 7944: Installation and User's Guide
Remote battery cable
air baffle.
Attention: Make sure that the cable is not pinched and does not cover any
connectors or obstruct any components on the system board.
connector on the battery carrier.
Attention: To avoid damage to the hardware, make sure that the black dot
on the remote battery cable connector faces away from the interposer card on
the adapter. Do not force the remote battery cable into the connector.
a. Connect the battery cable to the battery cable connector on the battery
carrier.
b. Place the battery carrier in the battery mounting slot on the microprocessor
2 air baffle and ensure that battery carrier posts align with the rings on the
battery mounting slot so that the battery carrier is secure in the slot.
Note: The positioning of the remote battery depends on the type of remote
battery that you install. The long edge of the battery might fit the
PCI riser assembly
(slot 1)