Lexmark CS310 Series User Manual page 76

Understanding the printer menus
Use
Quiet Mode
Off
On
Run Initial Setup
Yes
No
Paper Sizes
US
Metric
Alarms
Alarm Control
Cartridge Alarm
Timeouts
Sleep Mode
Disabled
1–60
To
Reduce the amount of noise produced by the printer.
Notes:
•
Off is the factory default setting. This setting supports the
performance specifications of your printer.
• On configures the printer to produce as little noise as
possible.
• Setting Quiet Mode to Off allows for optimal printing of color-
rich documents.
Run the setup wizard.
Notes:
• Yes is the factory default setting.
•
When the setup wizard is complete, the default setting
becomes No.
Specify the default paper measurement.
Notes:
•
US is the factory default setting.
•
The initial setting is determined by your country or region
selection in the initial setup wizard.
Set an alarm to sound when the printer requires user intervention.
Available options for each alarm type are:
Off
Single
Continuous
Notes:
•
Single is the factory default setting. This sets the alarm as
three quick beeps.
•
Off means no alarm will sound.
•
Single sounds three quick beeps.
• Continuous repeats three beeps every 10 seconds.
Specify the number of minutes of inactivity before the printer enters
a reduced power state.
Notes:
• 30 is the factory default setting.
•
Disabled appears only when Energy Conserve is set to Off.
76