Getting Started/Power - Horizon Fitness ELITE 2.0E Owner's Manual

G E T T I N G S T A R T E D
POWER
The console on your (Elite 2.0E) is powered by 2 AA batteries, which are replaceable through the
back side of the console. Your elliptical itself, is powered by you.
Your programmable (Elite 3.0E and Elite 4.0E) elliptical trainer is powered by a power supply. The
power supply must be plugged into the power jack, which is located in the front of the machine near
the front foot tube.
LEVELING (Elite 4.0E only)
The elliptical trainer should be level for optimum use. Once you have placed the elliptical trainer
where you intend to use it, raise or lower the adjustable levelers located on the bottom of the rear
base frame. Once you have leveled the elliptical trainer, lock the levelers in place by tightening the
wing nuts against the frame.
7 ELITE SERIES