Door Disassembly For Drawer Type Models; Remove Drawer Refrigerator Door; Replace Drawer Refrigerator Door - Kenmore 795.6900 Series Service Manual

3-7 DOOR DISASSEMBLY
FOR DRAWER TYPE MODELS
3-7-1 REMOVE DRAWER
REFRIGERATOR DOOR
Gently pry off Top Hinge Cover with a flat head
screwdriver and remove.
Fig. 21
Using 10mm or 13/32-inch socket wrench, remove
the 3 bolts and lift off the T op Hinge. Set parts aside.
Fig. 18 Fig. 22
Lift up door slightly and remove it. Place door on
a non scratching surface.
Fig. 23
Hinge Pin
Remove washer and set aside.
Use a 10mm or 13/32 inch socket wrench to remove
the 2 bolts in Middle Hinge Bracket. Remove
screws. Set Middle Hinge Bracket and other parts
aside.
Fig. 21
Middle Hinge
Bracket
Bolts
Fig. 24
Screw
Middle Hinge
3-7-2 REPLACE DRAWER
REFRIGERATOR DOOR
Reattach Middle Hinge Bracket with the previously
removed 2 bolts and 2 screws.
Fig. 21
Middle Hinge
Bracket
Bolts
Fig. 25
Put refrigerator door down over the Hinge
Pin on the Middle Hinge Pin Bracket.
Fig. 26
Line up Top Hinge with holes in top of
refrigerator. Use the 3 bolts to replace the Hinge.
Fig. 18
Fig. 27
Tighten Bolts. Force-fit T op Hinge Cover over top
Hinge.
- 11 -
Screws Screws
(2) (2)
Hinge Pin
Top Hinge Pin
Fig. 28