Pull Out Drawer - Kenmore 795.6900 Series Service Manual

3-7-4 PULL OUT DRAWER

(b) HOW TO REMOVE PULL OUT DRAWER
IMPORTANT: To avoid possible injury, product or
property damage, you will need two people to perform
the following instructions.
• Pull the drawer open to full lower extension. Remove
durabase by lifting it from rail system.
Fig. 44
• Press both hangers with yours thumbs to lift it up.
Fig. 45
• Separate the left and right rail cover
Fig. 46
•
Remove the screws of the rail on both sides.
Fig. 47
Durabase
screw
When removing drawer door, do not hold it
by the handle. Door could fall down and you may be
injured grasp door with both hands as pictured below
When removing.
When laying down the drawer, be careful
not to damage the floor or hurt your feet with the sharp
edges on hinge side.
• With both hands, hold both sides of the door and pull it
up to separate it from the rails.
Fig. 48
Fig. 49
• Push rails back into drawe cavity. With both hands,
hold the center of the bar and push it in so that both
rails go back simultaneously.
Fig. 50
Fig. 51
- 14 -
Door
supports
Rail tabes