Assembling Cleaner; How To Assemble - Hoover U4359 Owner's Manual

How to assemble

Before assembly, identify the
type of handle on your cleaner:
1) Square handle with molded
grip or 2) Round handle. Then as-
semble the cleaner according to
handle type.
molded grip
A. Put handle together
Remove cardboard from end of
handle sections. Remove bolt
and nut from upper handle sec-
tion.
Slide the two handle sections to-
gether, making sure that both
cord storage hooks are on the
same side of handle. Insert bolt
through small holes and secure
with nut. Tighten nut with screw-
driver.
If the nut and bolt will not assem-
ble as shown in the illustration,
the holes in the handle are not
lined up correctly.
B. Attach handle to
the cleaner
Unscrew nut and remove bolt
from handle bail.
Connect electric plug from the
handle with the socket in the han-
dle bail. Make sure plug and sock-
et assembly is securely locked.
Carefully guide the plug and
socket assembly into the handle.
Push the handle down into the
bail until it is securely in place.
5