Table of Contents
Advertisement
Assembling the Vacuum Cleaner
IMPORTANT! Always remove the plug from the power socket before fitting or
removing accessories! Do not exceed the red mark when pulling out the cord.
The yellow mark shows the ideal cable length.
1.
Connect
the
hose to
the cleaner at
the hose
inlet.
2.
Insert the tube into
the
co
mbination
floor tool.
3.
Fit the other end of the tube to
the
handle.
4.
Do not
extend
the power
cable beyond the yellow
mark.
5.
Press
the On/Off butt
on to turn the
cleaner
on.
6.
Suction
can
be
varied
by
opening or closing the
air
relief
valve.
7.
Advertisement
Table of Contents
