Table of Contents
Advertisement
Available languages
Available languages
Hereby, Candy Hoover Group Srl declares that the radio equipment is in compliance with
Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the
following internet address: www.candy-group.com
CANDY HOOVER GROUP S.r.l. Via Privata Eden Fumagalli, 20861 Brugherio (MB) Italy
GETTING TO KNOW YOUR CLEANER
A.
On / Off Power Control Button
B.
Cord Reel Button
C. Parking Slot
D. Cleaner Main Body
E.
Dust Bin Assembly
F.
Dust Bin Lid Opening Latch
G. Dust Bin Release Handle
H. Dust Bin Lid
I.
Separation System with integrated
Shroud Cleaning System
J.
Dust Bin
K.
Dust Bin flap Release Button
L.
Hose
M. Hi-Controller Remote Control
Handle with Soft Grip:
Ma. Variable Power Control Buttons
Mb. Silent Power Button
Mc. On/Off Button
Md. Led Battery Indicator of
Handle's Remote Control
ASSEMBLING YOUR CLEANER
Remove all components from the packaging.
1.
Connect the hose to the cleaner main body, ensuring it clips and locks into position.
To release: simply press the buttons on the hose end and pull. [1]
2.
Connect the hose handle to the end of the extension tube upper, or accessories* if
required. [2]
Connect the extension tube lower to the carpet and floor nozzle**, [3] or accessories*
3.
if required.
* Certain Models Only
** May vary according to model
N. Pre-motor Filter
O. Exhaust Filter
P.
Integrated Accessories onto the
handle: Built-in Crevice Tool,
Dusting Brush and Furniture Tool
Q. Telescopic Tube Secure Connection
R. Telescopic Tube Adjuster
S.
Telescopic Tube
T.
Carpet and Floor Nozzle** (GP)
Ta. Carpet and Floor Nozzle
Secure Connection
Tb. Floor Type Selector Pedal
Tc. Nozzle Suction Regulator
U. Advanced Furniture Nozzle*
V.
Long 2in1 Tool*
W. Mini Turbo Dual Action Pet
Hair Remover Nozzle*
X.
Mini Turbo Dual Action Allergen
Remover Nozzle*
Y.
Parquet Extra Care Nozzle*
USING YOUR CLEANER
1.
Extract power cord and plug it into the power supply. Do not pull the cord beyond
the red marker. [6]
2.
Adjust the length of the telescopic tube by moving the telescopic tube adjuster up
and raise or lower the hose handle to the most comfortable cleaning position. [5]
Carpet & Floor Nozzle**. Press the pedal on the nozzle [7] to select the ideal cleaning
3.
mode for the floor type.
Hard Floor: The brushes are lowered to protect the floor.
Carpet: With lifted brushes for the deepest clean.
Carpet & Floor Nozzle**: [4]
-
Hard floor Cleaning: Press the floor type selector pedal on the nozzle on Hard Floor
mode and adjust the nozzle suction regulator to open [4a] or close [4b] position
for the most comfortable cleaning position. In this position brushes are lowered to
protect hard floors.
-
Carpet Cleaning: Press the floor type selector pedal on the nozzle on Carpet mode
and adjust the nozzle suction regulator to open position. In this position brushes are
raised for a deeper cleaning of your carpet. [4c] It's suggested to open the nozzle
suction regulator on carpet to allow a better sliding.
Switch the cleaner on by pressing the On/Off button on the cleaner main body [8] or
4.
pressing the On/Off button on the hose handle. [9]
5.
Variable Power Control - Adjust the power level by pressing the variable power
control buttons on the hose handle. [9]
Hi-Controller Handle Settings: [9, M]
-
Turn the cleaner on/off: press the on/off button.
-
Variable power control: press the "+, -" buttons to adjust the power.
-
Silent Power Mode: press the silent power button to clean thoroughly at a reduced
noise level.
Integrated accessories on the handle: [P, M]
-
Built-in Crevice Tool: The hose handle end can be used as a crevice tool to reach
narrow spaces.
-
Furniture Tool: Press the latches on both sides of the handle and slide downwards to
release the furniture tool to clean soft surfaces and textiles (curtains, upholstery).
-
Dusting Brush: Press the latches on both sides of the handle and slide downwards,
then push the slider to the end to release the built-in dusting brush. Ideal for hard
surfaces (bookshelves, keyboards, skirting boards).
6.
Switch off at the end of use by pressing the On/Off Button on the cleaner main body
or On/Off Button on the hose handle. Unplug and rewind the power cord by pressing
the cord reel button.
7.
Parking and storage - The tube can be parked for temporary storage while in use, or
in the storage position when not in use. [11]
2
GB
Advertisement
Table of Contents
