Method Of Cancellation From Service Mode; How To Adjustments; How To Write The Data; Memory Write Confirmation Method - Sony KP-FX532M90 Service Manual

KP-FX432M90/FX532M90
RM-1014

3-8-3. Method of Cancellation from Service Mode

1. Set the standby mode (Press "
the commander), then press "
STANDBY)" button again, hereupon it becomes TV mode.

3-8-4. How to Adjustments

1. Set in the service mode, the following screen will appear.
Category Name Item Name Mode
Item No. Data
OSD 0 OSV 32
000Q 3.1M 0010 0000 20 00 00 0000
Total Power On time
Suffix No.
(Hours)
Software
Version
2. Press "1" or "4" button on the commander to select the ad-
justment item.
3. Press "3" or "6" button on the commander to change the
adjustment data.
4. Move " " up or down to select the adjustment category.
When move " " up (category up), service mode changes in
the order as shown below.
PIC YCTM
SOU YCTS
DRCV YCTC
LUMA MCP
COLR
DEF1
CLTY DEF2
MIDE DEF3
CCPM DEF4
COMB DEF5
* : When it moves from PJE to other categrys,
repeat 1 or 4 button and press it.
(TV STANDBY)" button on
(TV
50 : PAL, SECAM
60 : NTSC
SERVICE 60 480IL
MID1 DDEV PFID
PFOP
MID2 PJE*
MID3 GRN GUID
VSW AP POWR
CRNR MSMO OPM
RNR 3CM OPB
BNR OSDP SRV
SNNR ASEL OSD
AWID VSEL
MSP
TEXT

3-8-5. How to Write the Data

1. Set in the service mode.
2. Press "1" or "4" button on the commander, select the ad-
justment item, and press "3" or "6" button to change the
data.
3. Press " (MUTE)" button on the commander and it will indi-
cate "WRITE" on the screen.
4. Press "-" button on the commander to write into memory.
(The "WRITE" display will be changed to red color while
executing, and back to "SERVICE".)
Commander Function (Except PJE mode)
Button Mode
+ - WRITE
7 + - READ
8 + - NORMAL
5 + - INITIAL
stored.
2 + - COPY
+ - WRT5060
Note : Before changing to other modes, press "
"-" buttons on the commander to write the data.
(Omission of this operation causes the data to be returned
to the data before adjustment.)
: Confirm the adjustment mode before writing data for data
values because to vary in each adjustment mode.
: The adjustment item that there are no relations in the ad-
justment is not to change data values because all items are
written in each adjustment mode.

3-8-6. Memory Write Confirmation Method

1. After adjustment, turn off the AC main power switch off.
2. Turn the power switch ON and set in service mode.
3. Call the adjustment items again to confirm adjustments were
made.
– 20 –
Description
Writes data to NVM.
Reads data from NVM.
All user control goes to the standard.
Service data initialization. Not
(Be sure not to use usually)
Do not operate with a remote
commander.
(The data vary with among mode.)
(MUTE)" +