Set Mode; Set Mode Programming - Icom IC-M36 Instruction Manual

Set mode programming

Set mode is used to change the conditions of transceiver's
functions: Beep tone function, Weather alert function, Prior-
ity scan function, Scan resume timer, Auto scan function,
Dual/Tri-watch function, Monitor key action, Automatic back-
lighting, LCD contrast setting, Power save function, Squelch
sensitivity, Low ix function* and Noise detection function.
*Appears only when the optional battery case is attached.
D SET MODE ITEMS
• Noise detection • Beep tone
• Low fix*
• Squelch sensitivity
• Power save
(The display shows the current settings, and the selected item is displayed in the dotted circle.)
• Weather alert
Starting item
: Push or
: Push +
• LCD contrast
D Set mode operation
q Turn power OFF.
w While pushing [VOL/SQL MONI], turn power ON to enter
the set mode.
• "bP" appears.
e Push [VOL/SQL MONI], or push [Y]/[Z] while pushing
and holding [VOL/SQL MONI] to select the desired item.
r Push [Y]/[Z] to select the desired condition of the item.
t To exit the set mode, push [16 9].
• Priority scan
*Appears only when the optional
+
battery case is attached.
• Automatic
backlighting

SET MODE

• Scan resume timer
• Auto scan
• Monitor key action • Dual/Tri-watch
7
1
2
3
4
.
6
7
8
9
10
11
12
13
14
1.
16
17