Ai Mode - Honeywell NXL User Manual

7
76(96)
For more information on the expander board-related parameters, see Chapter 7.4.9.
Figure 7-16. Expander board information menu
7.4.7.6

AI mode

The parameters P6.9.1 and P6.9.2 select the analogue input mode. P6.9.1 appears only in classes
MF4 – MF6
0 = voltage input (par. 6.9.1 default)
1 = current input (par. 6.9.2 default)
Note! Make sure that the jumper selections correspond to the selections of this parameter. See
Figure 6-23.
READY
S TO P I/O term
Control Keypad
READY
S TO P I/O term
nxlk27.f h8
Honeywell Honeywell
Honeywell Honeywell