Control Place Indications; Numeric Indications - Honeywell NXL User Manual

7
52(96)

7.1.2 Control place indications

The symbols I/O term, Keypad and Bus/Comm (see chapter 7.4.3.1) indicate the choice of control
place made in the Keypad control menu (see chapter 7.4.3).
I/O term
a
Keypad
b
Bus/Comm
c

7.1.3 Numeric indications

The numeric indications provide the user with information on his present location in the keypad menu
structure as well as with information related to the operation of the drive.
Control Keypad
= I/O terminals are the selected control place; i.e. START/STOP
commands or reference values are given through the I/O terminals.
= Control keypad is the selected control place; i.e. the motor can be
started or stopped and its reference values altered from the keypad.
= The frequency converter is controlled through a fieldbus.
Honeywell Honeywell
Honeywell Honeywell