Keypad Push-Buttons; Button Descriptions - Honeywell NXL User Manual

¡ ¡ ¢ ¢ £ £ ¤ ¤ ¥ ¥ £ £ ¦ ¦ ¦ ¦
¡ ¡ ¢ ¢ £ £ ¤ ¤ ¥ ¥ £ £ ¦ ¦ ¦ ¦
7.2

Keypad push-buttons

The NXL seven-segment control keypad features 7 push-buttons that are used for the control of the
frequency converter (and motor) and parameter setting.

7.2.1 Button descriptions

ENTER
=
reset
=
ENTER
=
reset
=
+
–
=
=
3 3 3 3
=
4 4 4 4
Control Keypad
Figure 7-2. Keypad push-buttons
There are two operations integrated in this button. The button operates
mainly as reset button except in the parameter edit mode. The button
operation is shortly described below.
The Enter button serves for:
1) confirmation of selections
2) fault history reset (2...3 seconds)
This button is used to reset active faults.
Note! The motor may start immediately after resetting the faults.
Browser button up
Browse the main menu and the pages of different submenus.
Edit values.
Browser button down
Browse the main menu and the pages of different submenus.
Edit values.
Menu button left
Move backward in menu.
Move cursor left (in parameter edit mode).
Exit edit mode.
Hold down for 5 seconds for quick change of control place;
manual (keypad) remote (fielbuds or I/O).
Menu button right
Move forward in menu.
Move cursor right (in parameter edit mode).
Enter edit mode.
7
53(96)