Table of Contents
Advertisement
RTC S4 Wakeup enables or disables the RTC (Real Time Clock) wakeup
from S4 (Hibernation) feature when AC power is connected. Set this item
Enabled
to
automatically perform tasks at specific times.
LAN Wake Up From S3 or S4/S5 allows a LAN activity to wake up the
system from S3 (Sleep) or S4 (Hibernation)/S5 (shutdown) state.
USB Wake Up From S3 allow a USB device activity to wake up the system
from S3 (Sleep) state.
Power Button Delay sets the amount of time (2, 4, 6, or 8 seconds) to press
and hold the power button for it to function.
AC Initiation sets if connecting AC power will automatically start or resume
your Tablet PC.
SATA Mode set to
take advantage of Advanced Host Controller Interface features. The options
IDE
AHCI
are
and
CAUTION: Incorrect SATA mode settings can result in hard disk drive boot
failure.
Charging Backup Battery allows the main battery to charge the backup
battery. When set to
main battery if the AC adapter is not connected. Charging starts when the
backup battery has less than 70% capacity left and the main battery has
more than 70% capacity left. Charging stops when the backup battery
reaches 90% capacity or the main battery has less than 50% capacity left.
Disabled
When set to
only.
5-6
Using BIOS Setup and System Recovery
if you use Windows task scheduler to have the computer
AHCI
if your hard disk supports AHCI. AHCI allows you to
.
Enabled
, the backup battery can be charged by the
, the backup battery will be charged by the AC adapter
Advertisement
Table of Contents
