Table of Contents
Advertisement
2. By default, Getac Smart Tag scans three tag types, once for each type.
To change settings, use the options menu. (See "Options Menu" later for
information.)
3. Tap the floating button to start scanning. While scanning is in progress,
the button's color is orange.
4. The result window as below appears. The Card Type field shows which
type of tags are being scanned now. If a tag of the matching type is
found, the Card UID field shows its UID; otherwise the field is blank.
Tap OK to close the window.
5. The program scans for 3 seconds for each tag type (14443-A, 14443-B,
and 15693). The scanning stops after 9 seconds.
6. When you next start a scanning session, it begins with the last scanned
card type in the previous session.
6-32
Using Getac Software
Idle
Scanning
Advertisement
Table of Contents
