Playback Procedure; Playback By Selecting A Title - Toshiba D-VR5SU Service Manual

Various settings
Setting the audio / Setting the recording
SAP (Second Audio Program)
This unit is fitted with an SAP broadcast system that
enables you to switch to a second audio program while
viewing a selected channel.
This function applies only when the program is broad-
cast in multiple languages through the SAP broadcast
system.
Select "SAP" and select "ON" to activate SAP. Select
"OFF" to cancel.
Listening to SAP
When the unit is turned on or a channel selection is
made, make certain the letters "SAP" appear on the
screen. This means that "Second Audio Program"
broadcasting is available.
DOLBY DIGITAL OUTPUT
Select from the following methods of outputting the au-
dio of discs that were recorded with Dolby Digital.
DOLBY DIGITAL: Outputs in Dolby Digital sound.
PCM: Converts the sound to PCM
and outputs it.
NOTE:
Select PCM if you are connected to an audio amplifier
and the amplifier is not Dolby Digital compatible.
This section describes recording settings.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select "REC SETUP". For the procedure, see steps
1 to 3 in "Using the SETUP MENU" on page 24.
SETUP MENU
TIMER REC SET
REC SETUP
SYSTEM SETUP
INITIAL REC TO DVD
AV SETUP INITIAL REC MODE SP
AUTO CHAPTER 10MIN
REC SETUP
INDEX PICTURE 0 SEC
CH SETUP
BLACK LEVEL (REC) Standard
OTHER
SELECT
ENTER ENTER RETURN BACK SETUP END
INITIAL REC TO
You can select the recording media that is first displayed
in the item "REC TO" on the timer recording screen.
Select "INITIAL REC TO" and select "DVD" or "VCR".
32
Disc playback

Playback procedure

Preparation:
• Turn ON the TV and set to the video input mode.
• Press DVD to select the DVD mode. (The DVD indicator will light.)
NOTE: It is impossible to switch to the VCR mode while DVD is
played back.
1
Press OPEN/CLOSE.
The disc tray will open.
2
Place a disc onto the tray.
Hold the disc, position it with the
printed label side up, align it with
the guide and place it in its proper
position.
3
Press OPEN/CLOSE to close the
disc tray.
"READING" appears on the screen
and some discs start playback au-
tomatically.
• A menu screen may appear on
the TV screen if the disc has a
NOTES:
menu feature. In this case, press
• If a non-compatible disc is loaded, "IN-
,
CORRECT DISC", "REGION CODE
ERROR" or "PARENTAL ERROR" will
4
Press PLAY to start playback.
appear on the TV screen according to
the type of loaded disc. In this case, check
your disc again (See pages 9 and 26).
5
Press STOP to end playback.
• Some discs may take a minute or so
• The DVD/VCR memorizes the stopped point, depending on
to start playback.
the disc. "
• A prohibition symbol " " may appear
at the upper right of the screen. This " " keeps blinking in the display window until the playback is
symbol means either the feature you stopped completely. Press PLAY to resume playback (from the
tried is not available on the disc, or the
scene point).
DVD/VCR can not access the feature
• If you press STOP again ("
at this time. This does not indicate a
VCR will clear the stopped point.
problem with the DVD/VCR.
6
• When you set a single-faced disc la- Then press OPEN/CLOSE.
bel downwards (ie. the wrong way up) The disc tray opens.
and press PLAY or OPEN/CLOSE,
Remove the disc and press ON/STANDBY.
"READING" will appear and then it will
The disc tray closes automatically and DVD/VCR turns off.
change to "NO DISC".
• Some playback operations of DVDs
may be intentionally fixed by software
producers. Since this DVD/VCR plays
DVDs according to the disc contents
the software producers designed,
some playback features may not be
available. Also refer to the instructions
supplied with the DVDs.
• When playing DTS-encoded Audio
CDs, excessive noise will be heard
from the analog stereo outputs. To
avoid possible damage to the audio
system, the consumer should take
proper precautions when the analog
stereo outputs of the DVD/VCR are
connected to an amplification system.
34
INITIAL REC MODE
You can select the recording mode that is first displayed in
the item "REC MODE" on the timer recording screen.
Select "INITIAL REC MODE" and select XP, SP, LP, or SLP.
NOTES:
• For the DVD recording mode, see page 53. And for
the VCR recording mode, see page 49.
• Even if you select the recording mode by "INITIAL
REC MODE", the recording mode on the display
window does not change. If you want to change the
recording mode, press REC MODE/SPEED on the
remote control.
AUTO CHAPTER
You can automatically make chapter marks on the DVD
to be recorded.
Select "AUTO CHAPTER" and select the interval be-
tween chapter marks from the below.
OFF: The automatic chapter is not used.
5 MIN: The interval is set to 5 minutes.
10 MIN: The interval is set to 10 minutes.
15 MIN: The interval is set to 15 minutes.
30 MIN: The interval is set to 30 minutes.
INDEX PICTURE
You can set the time that the thumbnail image is regis-
tered in the title menu of DVD-RW (VR mode).
Select "INDEX PICTURE" and select from the below.
0 SEC: The image of a recording start point is regis-
tered.
1 MIN: The image of a recording at 1 minute start
point will be registered.
3 MIN: The image of a recording at 3 minutes start
point will be registered.
NOTE:
You cannot select the thumbnail image for Video mode.
BLACK LEVEL (REC)
You can set the black level for when you record.
Standard : Records at the level of the input
source.
Enhanced : Lowers the level 7.5IRE and records.
The unauthorized recording, use, distribution, or
revision of television programs, videotapes, DVDs
and other materials, is prohibited under the Copy-
right Laws of the United States and other countries,
and may subject you to civil and/or criminal liability.
READING
, , or ENTER to operate a menu feature.
" appears on the screen for approx. 4 seconds.
" appears on the screen), the DVD/
Setting the channel / Setting other items
This DVD/VCR is equipped with a channel memory
feature that allows you to skip channels up or down
to the next channel set in memory, hence skip over
unwanted channels.
Before selecting channels, they must be pro-
grammed into the DVD/VCR's memory. In addition
to normal VHF and UHF channels, this DVD/VCR can
receive up to 113 Cable TV channels. To use this
DVD/VCR with an antenna, set the TV/CABLE menu
option to the TV mode. When shipped from the
factory, this menu option is in the CABLE mode.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select "CH SETUP". For the procedure, see steps 1
to 3 in "Using the SETUP MENU" on page 24.
SETUP MENU
TIMER REC SET CH SETUP
SYSTEM SETUP
TV/CABLE SELECT CABLE
AV SETUP
AUTO CH MEMORY PROCEED
REC SETUP ADD/DELETE PROCEED
CH SETUP
OTHER
SELECT
ENTER ENTER RETURN BACK SETUP END
TV/CABLE SELECT
Select "TV/CABLE SELECT" and select "TV" or
"CABLE".
TV: VHF/UHF channels
CABLE: CABLE TV channels
AUTO CH MEMORY
The VCR can receive a maximum of 181 channels by
presetting the channels into memory.
When you select "AUTO CH MEMORY" and press
ENTER, the AUTO CH MEMORY function will be acti-
vated. The channel display will count up and, when fin-
ished, the screen returns to normal.
ADD/DELETE (channels)
You can add the channels you want or delete the chan-
nels you do not want manually.
Select "ADD/DELETE" and select "ADD" or "DEL" for
each channel.
• Press CH / to select the channel.
The numeric keys can also be used for selection.
• When you want to delete the selected channel, press
to select "DEL" and press ENTER.
• When you want to use the selected channel, press
to select "ADD" and press ENTER.

Playback by selecting a title

Preparation:
• Turn ON the TV and set to the video input mode.
When playing back a recorded
• Load a recorded DVD.
disc, you can display the title
• Press DVD to select the DVD mode. (The DVD indicator will light.)
menu and select the title to be
1
played back.
Press TITLE MENU.
The title menu will appear.
ENTER
If there are many original titles and playlists...
Before pressing TITLE MENU, press DVD MENU until "VR ORG"
or "VR PL" appear on the upper right of the TV screen, then press
TITLE MENU.
The first original title or playlist will be highlighted.
2
Press or
NOTE:
When a disc that has been recorded
in the Video mode is finalized, the title
menu is automatically changed that
can be played back even with other
DVD players. Thumbnail image and
recording information will not appear
ENTER
in the title menu after finalizing
3
Press ENTER.
— — — — The selected title is played back.
1/1
11/23/2006 08:41AM 006 SLP NOTES:
11/25/2006 10:03PM 011 SP
• If you don't display the title menu and press PLAY, the first title is
11/29/2006 11:30AM 009 SP
played back.
12/01/2006 06:52PM 006 XP
11/23/2006 08:41AM 006 SLP PL
• The title menu is used not only for playing back titles but also for
editing various discs and titles. For details of editing operation, see
page 63.
PREV
• If you create a playlist, an original title and playlist appear in the title
NEXT
menu. For creating a playlist, see page 64.
• In case the disc includes more than 9 titles, you can turn to the next
or the previous page. Press
previous page. To return to normal use, press
• You cannot switch to the VCR mode when the title menu is showing.
Press TITLE MENU to clear the title menu, then press VCR to switch
to the VCR mode.
You can set the switching interval between played
back images in the slide show mode. And, you can
®
display the registration code of DivX VOD.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select "OTHER". For the procedure, see steps 1 to 3
in "Using the SETUP MENU" on page 24.
SE UP MENU
IMER REC SE O HER
SYS EM SE UP OFF
JPEG IN ERVAL
AV SE UP
DivX(R) VOD DISPLAY
REC SE UP
CH SE UP
O HER
SELEC
EN ER EN ER RE URN BACK SE UP END
JPEG INTERVAL
You can select the interval time for JPEG slide show
(page 47).
Select "JPEG INTERVAL" and select the switching in-
terval between images from the below.
OFF: The slide show mode is not used.
5 SEC: The interval is set to 5 seconds.
10 SEC: The interval is set to 10 seconds.
15 SEC: The interval is set to 15 seconds.
®
DivX VOD
This unit is designed and manufactured to support the
®
DivX VOD (Video On Demand) DRM (Digital Rights
Management). You can display the registration code of
VOD.
33
Playlist
Thumbnail image
Original titles
Recording information
TITLE MENU
DISC NAME:- - - -
REC DATE :11/23/2006
11/23/2006 08:41AM 006 SLP
TIME :08:41AM
11/25/2006 10:03PM 011 SP
LENGTH :00:30:17
11/29/2006 11:30AM 009 SP
CHANNEL :006
12/01/2006 06:52PM 006 XP
REC MODE :SLP
11/23/2006 08:41AM 006 SLP PL
SELECT SET
TITLE
PLAY RETURN BACK END
MENU
to select the title you want to playback.
TITLE MENU
DISC NAME:- - - -
REC DATE :11/29/2006
11/23/2006 08:41AM 006 SLP
TIME :11:30AM
11/25/2006 10:03PM 011 SP
LENGTH :00:59:45
11/29/2006 11:30AM 009 SP
CHANNEL :009
12/01/2006 06:52PM 006 XP
REC MODE :SP
11/23/2006 08:41AM 006 SLP PL
SELECT SET
TITLE
PLAY RETURN BACK END
MENU
, then press or to display next/
.
35