Stereo Recording And Playback; Editing The Disc - Toshiba D-VR5SU Service Manual

Recording
Timer recording
11
Select "OK" and press ENTER.
The timer program is determined and the TIMER REC SET
screen appears again.
12
When you enter the other program for the timer recording, re-
peat the steps 3 to 11.
13
Press SETUP.
The TIMER REC SET screen disappears and the display will
return to the normal screen.
14
Press TIMER REC. The timer indicator "
display and the unit stands by for recording.
Stopping the timer recording
After the timer recording has started, you can cancel the timer record-
ing (but continue recording), or stop recording completely if you want.
To cancel the timer recording, press and hold TIMER REC for more
NOTES:
than 2 seconds. The timer indicator "
• Recording starts a few seconds be-
and recording continues. Press STOP to stop recording completely.
fore the preset starting time.
Checking or changing the timer recording
• You cannot use the timer recording
for the both DVD and VCR at the
When you want to check the selected timer recording, follow the steps 1
same time. and 2 of "Setting timer recording" and display the TIMER REC SET screen.
• You can playback the DVD during To change the timer recording, select the program to be changed and
the VCR timer recording, and you
press ENTER. The changing method is the same as that for the re-
can playback the VCR during the cording a program for the first time.
DVD timer recording.
Cancelling the timer recording
• The timer recording program is
Display the TIMER REC SET screen.
stopped during timer recording, the
Select the program you want to cancel and press CANCEL, then the
stopped program is not erased from
selected program will be erased from the timer recording list.
the timer recording list. In this case,
In case Timer programs-overlap
please cancel the program,
otherwise the stopped program will Do not overlap timer programs as portions of the conflicting programs
be activated if the unit returns to will be lost. The first recording time has priority over the next recording
timer recording standby mode. time as shown in the diagram below.
In this case, the next recording time is delayed a maximum of about
The unauthorized recording, use,
1 minute.
distribution, or revision of television
If you set up many timer recording programs at the same start time,
programs, videotapes, DVDs and
the priority will be the top program in the timer recording list.
other materials, is prohibited under
the Copyright Laws of the United
Program 1
States and other countries, and
Program 2
may subject you to civil and/or
Program 3
criminal liability.
Recording
Control Settings
60
Recording

Stereo recording and playback

When a MTS STEREO broadcast is re-
The VHS Hi-Fi audio system per-
mits high fidelity recording of MTS ceived, the word "STEREO" will appear on
the screen and the program can be viewed
STEREO TV broadcasts.
or recorded in stereo.
The Hi-Fi STEREO recording procedure is
the same as for normal recordings.
NOTE:
When using a Cable TV system, stereo TV programs may be transmit-
ted over a mono cable channel. In this case the word "STEREO" will
not appear and the sound will be in mono.
Output selection
When viewing an MTS STEREO TV program, or playing a prerecorded
Hi-Fi STEREO on video tape, press AUDIO SELECT to select how the
audio will be heard through the speakers. Normally set to the Hi-Fi
STEREO position, this button can be set to the MONO position if the
stereo audio is of poor quality. The "R" and "L" positions allow the au-
dio from the Right or Left Hi-Fi channel to be heard over both TV speak-
ers. This button has no effect when viewing a monaural audio pro-
gram. Each time when you press the button, output selection display
appears on the screen for several seconds. Refer to the chart below.
Output selection for DVD
You can switch between the left or right channel and stereo only
when playing a disc on which a bilingual broadcast was recorded in
the DVD-RW VR mode. It is not possible to switch between channels
otherwise as only the channel selected in the setting of SAP (Second
Audio Program; ON or OFF) is recorded in the DVD-RW Video mode
or DVD-R (see page 32).
NOTE:
When a stereo or monaural broadcast is recorded, either stereo or
monaural, respectively, is played back and it is not possible to switch
between channels.
NOTES:
• When playing back a video tape
or disc that is not recorded in Hi-Fi
stereo mode, the audio will auto-
matically be monaural.
• When listening to a Hi-Fi video
tape, disc or MTS broadcast
through the RF OUT (UHF/VHF)
jack (Audio/Video cord not con-
nected), the sound will be monau-
ral.
62
SETUP MENU
TIMER REC SET
REC REC
TYPE ONCE
TO MODE
DATE (MM/DD) 11/20(TH)
START 08:00PM
END 09:30PM
CH 12
REC TO DVD
REC MODE LP
OK
SELECT
ENTER ENTER RETURN BACK SETUP END
" will appear on the
" disappears from the display
8 : 00 9 : 00 10 : 00 11 : 00
Deleted Parts
Non Recorded Portion Parts
Prog.1 Prog.2 Prog.3
STEREO
OUTPUT SOUND HEARD ON BOTH
SELECTION SPEAKERS
STEREO
STEREO
LEFT CHANNEL AUDIO
L ch
R ch RIGHT CHANNEL AUDIO
MONO
MONO
Chase Playback
1
While recording a TV program onto the DVD-RAM disc, press PLAY
to start chase playback.
You can begin playback from the
The TV program as it is being recorded will played back.
beginning of a program currently
2
being recorded. You will find this Locate a scene you want through the following operations if nec-
function of great advantage on
essary.
long programs, as you do not have
to wait for the end of recording to
Still playback:
begin playback.
Press PAUSE.
• To resume chase playback, press PLAY.
Fast forward/Review playback:
Press SEARCH 8/9. Every press SEARCH, it switches the
speed of the search.
• To resume chase playback, press PLAY.
• If the playback position catches up to within about 60 seconds,
chase playback resumes. It may differ depending on the
recording condition and search speed.
Locating a chapter:
Press SKIP 6/7 to locate a chapter that you want to watch.
• If you press SKIP 7 while playing back the newest chapter,
it starts playing back from about 15 seconds before the
recording position.
Locating a specific scene:
Press PLAY MODE enables you to do a Time Search or a
Chapter Search. (See page 38.)
3
Press STOP to end chase playback.
If you press STOP again, the recording stops.
NOTES:
• Chase playback is not available
when recording a DVD-RW/R disc
and video tape.
• Chase playback is not available
when recording in XP mode.
• Slow, Instant skip, Instant replay,
A-B repeat, and Frame advance
will not work during chase play-
back.
• Chase playback does not work
until 30 seconds of recording have
elapsed.
• If you press DISPLAY during
chase playback, the information
screen is displayed (see page 36).

Editing the disc

Editing the disc
This section explains how to edit Title menu
the recorded contents on DVD-
When the content is recorded, a title name that includes the date, time,
RWs. However, the items that you channel number and other information is created automatically.
can edit vary with the recording
The title menu can be used when you playback after confirming the
formats. In VR mode, you can edit contents (see page 35), or when you check the contents recorded on
various title menus, whereas in
the disc.
Video mode, you can edit only a
Original title
few items.
The titles explained above are called original titles; these will be added
with every recording. In VR mode you can do various editing opera-
tions i.e., you can rename the titles or add the chapter marks. In addi-
tion, you can erase the unnecessary titles to increase the disc space.
Playlist
You can create a playlist based on the original titles.
You can combine or erase undesired scenes.
If you create a playlist, it will become the primary list used by the disc.
If you create a playlist to customize your viewing preferences, and
choose to delete it, the original titles will not be affected. It is recom-
mended to create and edit the playlist to prevent important titles from
being erased accidentally.
If you create a playlist, both the original title and playlist will be dis-
played on the title menu.
Editable items
The items that can be edited are different between original title and
playlist. For the disc in Video mode, only the title name can be edited.
The items can be edited in each are as follows:
Editing items
NOTES:
Playback
• This unit cannot record or edit a
Adding chapter mark
disc which was recorded or edited
Combining chapters
using another DVD recorder.
• You cannot edit or record the disc
Erasing scenes
on which disc protection is set. In
Erasing titles
such a case, be sure to cancel the
Renaming titles
disc protection before starting the
Creating playlist
operation.
• When a scene has been erased,
Combining titles
the selected position for erasing
may vary slightly from the actual
If you finalize the disc in Video mode, the title menu is automatically
erased position. changed. Thumbnail image and recording information will not appear
in the title menu affter finalizing.
Using these editing functions to modify copyrighted content for any
purpose other than your private viewing may be prohibited under
the Copyright Laws of the United States and other countries, and
may subject you to civil and criminal liability.
61
VR mode Video mode
Original
Original Playlist
Y Y Y
Y N N
Y N N
Y Y N
Y Y N
Y Y Y
Y N N
N Y N
63