Table of Contents
Advertisement
Various settings
SETUP MENU
The SETUP MENU consists of several menus where
you can make various settings concerning lan-
guage, audio functions, and images. In addition, this
menu includes a clock, channel and other things
that require setting just after purchase.
For details of each menu, see the corresponding
section in this chapter.
Using the SETUP MENU
The following example shows the basic setting proce-
dure of the SETUP MENU. The remote control keys
that operate the SETUP MENU are displayed at the
bottom of the screen.
1
Press SETUP while the DVD or video tape is
stopped.
The SETUP MENU screen will appear.
SETUP MENU
TIMER REC SET
SYSTEM SETUP
AV SETUP
REC SETUP
CH SETUP
OTHER
SELECT
ENTER
ENTER
RETURN
BACK
SETUP
END
2
Press
or
to select the desired menu and press
ENTER.
The submenu screen of the selected menu will ap-
pear.
SETUP MENU
TIMER REC SET
LANGUAGE
SYSTEM SETUP
PARENTAL
AV SETUP
CLOCK
REC SETUP
DISC SETUP
CH SETUP
OTHER
OTHER
SELECT
ENTER
ENTER
RETURN
BACK
SETUP
END
24
Various settings
Setting the parental control
Some discs are specified as not suitable for chil-
dren. This unit can prevent playback of such discs.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select "PARENTAL" from "SYSTEM SETUP". For the
procedure, see steps 1 to 3 in "Using the SETUP
MENU" on page 24.
SETUP MENU
TIMER REC SET
LANGUAGE
PARENTAL
PARENTAL
SYSTEM SETUP
PARENTAL
PASSWORD
- - - -
AV SETUP
PARENTAL
CLOCK
OFF
REC SETUP
DISC SETUP
CH SETUP
OTHER
OTHER
SELECT
0
9
INPUT NO.
CANCEL
DELETE
ENTER
ENTER
RETURN
BACK
SETUP
END
Selecting parental control
Select "PARENTAL" and select the parental control level
from the below.
Level Off:
Parental control is turned off.
Level 1:
Adult discs and general discs (R-rated
discs included) cannot be played back.
Level 2 to 3: Adult discs and R-rated discs cannot
be played back.
Level 4 to 7: Adult discs cannot be played back.
(Level 4 to 7 discs contain content chil-
dren age 15 and younger may not see.)
Level 8:
Virtually all discs can be played back
without restriction.
Select from level 1 to level 8.
On a scale of 1- 8, "1" is the most restrictive.
To lock the selected parental control level
1
To lock the selected parental control level, press
or
to select "PASSWORD".
2
Use the numeric keys to input a 4-digit password.
• If you input a wrong number, press CANCEL.
• Be sure to remember this number!
3
Press ENTER.
change to
1234
----
To cancel the locked parental control level
1
Select "PASSWORD" shown in step 1 of the above sec-
tion and use the numeric keys to input the password.
2
Press ENTER.
The locked mark " " will change to an unlocked
mark "
".
Then, you can change the parental control level, or
enter a new password.
26
3
Press
or
to select the desired submenu and
press ENTER.
The screen for the selected submenu will appear.
SETUP MENU
TIMER REC SET
LANGUAGE
SYSTEM SETUP
ENGLISH
OSD LANGUAGE
AV SETUP
DVD MENU
ENGLISH
REC SETUP
AUDIO
ENGLISH
SUBTITLE
AUTOMATIC
CH SETUP
OTHER
SELECT
ENTER
ENTER
RETURN
BACK
SETUP
END
4
Press
or
to select the desired item you want
and press ENTER.
Selectable items will be listed.
SETUP MENU
TIMER REC SET
LANGUAGE
SYSTEM SETUP
OSD LANGUAGE
ENGLISH
AV SETUP
DVD MENU
ENGLISH
AUDIO
ENGLISH
REC SETUP
CH SETUP
SUBTITLE
AUTOMATIC
ENGLISH
OTHER
FRANCAIS
ESPANOL
OTHER
----
AUTOMATIC
OFF
SELECT
ENTER
ENTER
RETURN
BACK
SETUP
END
5
Press
or
to select the desired item and press
ENTER.
This completes the setting procedure.
• To return to the previous screen, press RETURN.
• To close the SETUP MENU, press SETUP.
NOTES:
• For items that require different operations from the
basic setting procedure, the setting procedure is de-
scribed in each individual section.
• The item which is indicated by blue color cannot be
selected.
• "TIMER REC SET" cannot be selected when the
clock is not set.
NOTES:
• The selected level will apply to operations executed
after this.
• The unit cannot restrict playback of some discs.
• Some discs may not be encoded with specific rating
level information though its disc jacket says "adult".
Parental control will not work with those discs.
• If you forget your password, open the disc tray; if there
is a disc inside then remove it and close the tray. To
reset the code, press and hold number 7 on the re-
mote control, then press and hold STOP on the front
panel at the same time. The On-Screen Display will
show "PARENTAL UNLOCK". You can now set a new
password.
Temporarily cancelling parental con-
trol
Parental control can temporarily be canceled with some
DVDs.
1
Playback a DVD. (See page 34.)
2
If the DVD disc has been designed to temporarily
cancel the rating level, the screen that follows the
"READING" screen will change. If you select "YES"
with the ENTER, the message "YOUR DISC EX-
CEEDS THE PARENTAL CONTROL LEVEL
1."(e.g.) will then appear.
YOUR DISC EXCEEDS THE PARENTAL
CONTROL LEVEL 1.
PARENTAL CONTROL LEVEL
CANCEL PICTURE
3
If you wish to cancel the set rating level temporarily,
select "PARENTAL CONTROL LEVEL" with
or
, then press ENTER. If the password has been
selected, the password input screen will appear.
Alternatively, if the password has not been set, play-
back will commence. If you don't know (or have for-
gotten) the password, select "CANCEL PICTURE".
The setting screen will disappear. Press OPEN/
CLOSE to remove the disc.
4
Use the numeric keys to input the password.
• To interrupt the input process, press RETURN.
5
Press ENTER.
6
Playback will commence if the entered password
was correct.
NOTE:
This temporary cancellation of the rating level will re-
main active until the disc is ejected.
When the disc is ejected, the original rating level will be
set again automatically.
Setting the language
You can choose the language of the menu screen,
DVD menu, DVD audio and subtitles.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select "LANGUAGE" from "SYSTEM SETUP". For
the procedure, see steps 1 to 3 in "Using the SETUP
MENU" on page 24.
SETUP MENU
TIMER REC SET
LANGUAGE
SYSTEM SETUP
OSD LANGUAGE
ENGLISH
AV SETUP
DVD MENU
ENGLISH
REC SETUP
AUDIO
ENGLISH
SUBTITLE
AUTOMATIC
CH SETUP
OTHER
SELECT
ENTER
ENTER
RETURN
BACK
SETUP
END
OSD LANGUAGE
You can set the language for on screen display.
Select "OSD LANGUAGE" and select the language from
the below.
Selectable languages:
ENGLISH, FRANCAIS, ESPANOL
DVD MENU
When several menu languages are recorded on a DVD,
you can select the language to be used for the DVD
menu.
Select "DVD MENU" and select the language from the
below.
Selectable languages:
ENGLISH, FRANCAIS, ESPANOL
The selected language is the first priority menu lan-
guage.
OTHER
If you want to select another language, before press-
ing ENTER, input the language code by using the
numeric keys. (See the Language code list on page
84). Then press ENTER.
• If you input a wrong number, press CANCEL.
AUDIO
When several audio languages are recorded on a DVD,
you can select the audio language to be played back.
The selected language remains in effect after the power
is turned off or the disc is replaced.
Select "AUDIO" and select the audio language from the
below.
Setting the clock
The clock is set to the correct time automatically,
but it can also be set manually. The clock can be set
for daylight saving time and time zone.
Preparation:
• Turn ON the TV and set it to the video input mode.
• Select "CLOCK" from "SYSTEM SETUP". For the
procedure, see steps 1 to 3 in "Using the SETUP
MENU" on page 24.
SE UP MENU
IMER REC SE
CLOCK
SYS EM SE UP
CLOCK (MM/DD/YY)
01/01/06 12:00AM
AV SE UP
AU O CLOCK
ON
REC SE UP
S ANDARD IME
AU OMA IC
CH SE UP
DAYLIGH SAVING IME
AU OMA IC
O HER
SELEC
SELEC
EN ER
EN ER
RE URN
BACK
SE UP
END
CLOCK (manually)
You can manually set the date, year and present time
with the remote control.
Ex.: Setting the clock to "10:20AM" March, 25th, 2006.
1
Select "CLOCK" and press ENTER.
01
01 06 12:00AM
2
Select the desired items using
or
(month,
date, year, hour, minute and AM/PM), then press
ENTER.
3
Press
or
to set the value of the selected item.
3/25/ 6 1 :2 AM
4
Repeat steps 2 and 3 to set the date, year and
present time, and press ENTER. The SETUP
MENU will close.
This completes clock time setting.
AUTO CLOCK
You can automatically set the clock by turning "ON" the
AUTO CLOCK function.
When you want to set the auto clock function to "OFF",
select "AUTO CLOCK", press ENTER and select "OFF" .
For more information see page 23.
Selectable languages:
ENGLISH, FRANCAIS, ESPANOL
The language you have selected will play if it is re-
corded on the disc.
ORIGINAL
The unit will select the first priority language of each
disc.
OTHER
If you want to select another language, before press-
ing ENTER, input the language code by using the
numeric keys. (See the Language code list on page
84). Then press ENTER.
• If you input a wrong number, press CANCEL.
NOTE:
If the selected language is not recorded on the disc,
the first priority language is selected.
SUBTITLE
When several subtitles languages are recorded on DVD,
you can select the language to be used for the sub-
titles. The selected language remains in effect after the
power is turned off or the disc is replaced.
Select "SUBTITLE" and select the menu language from
the below.
Selectable languages:
ENGLISH, FRANCAIS, ESPANOL
The subtitle is displayed with the selected language
if it is recorded on the disc.
OTHER
If you want to select another language, before press-
ing ENTER, input the language code by using the
numeric keys. (See the Language code list on page
84). Then press ENTER.
• If you input a wrong number, press CANCEL.
AUTOMATIC
• The unit will automatically select the same language
in the AUDIO setting.
• When the unit selects the same language as the
AUDIO setting, the subtitles will not appear during
playback.
• When you do not use the same language as the
AUDIO setting, the subtitles will appear during play-
back.
OFF
Subtitles do not appear.
NOTE:
If the selected language is not recorded on the disc,
the first priority language is selected.
25
STANDARD TIME (Time zone)
In the rare event that you live within the broadcast range
of two stations in two different time zones, the DVD/
VCR may recognize the wrong station for the auto clock
set. To correct the situation:
Select "STANDARD TIME" and select the time zone from
the below.
Selectable time zones and correction times
ATLANTIC:
GMT – 4 hours
(GMT: Greenwich Mean Time)
EASTERN:
GMT – 5 hours
CENTRAL:
GMT – 6 hours
MOUNTAIN: GMT – 7 hours
PACIFIC:
GMT – 8 hours
ALASKA:
GMT – 9 hours
HAWAII:
GMT – 10 hours
AUTOMATIC: AUTO SET
NOTES:
• When shipped from the factory, the "STANDARD
TIME" is set to "AUTOMATIC".
• After making the auto clock setting, in some cases
the clock may display another time zone. You can cor-
rect the clock by selecting your time zone setting
above.
• When the clock is not set or you set the clock manu-
ally, the time zone setting is not available.
DAYLIGHT SAVING TIME
You can set the clock to daylight saving time automati-
cally or manually.
To select daylight saving time, select "DAYLIGHT SAV-
ING TIME" and select "ON", while to cancel the day-
light saving time, select "OFF".
ON:
For manual setting (forward 1 hour)
OFF:
For manual setting (back 1 hour)
AUTOMATIC: For automatic setting (read XDS in the
signal)
NOTES:
• When you want to set daylight saving time, on the
first Sunday in April you set it to "ON", and on the last
Sunday in October you set it to "OFF".
• When shipped from the factory, the "DAYLIGHT SAV-
ING TIME" option is set to "AUTOMATIC".
• When the clock is not set, the daylight saving time
setting is not available.
• When there is no daylight saving time in your area,
always select "OFF".
27
Hide quick links:
Advertisement
Chapters
Table of Contents
