Servicing Fixtures And Tools; Preparation For Servicing - Toshiba D-VR5SU Service Manual

Alignment Tape
ST-N5
ST-NF
VTR cleaning kit
JG022 Master Plane
JG185 Tentelometer
Ref. No. Part No.
JG002B APJG002B00
JG002E APJG002E00
JG002F APJG002F00
JG022 APJG022000
JG024A APJG024A00
JG153 APJG153000
JG176 APJG176101
JG185 APJG185000
1. While pressing the CH DOWN button on the set for more than 2 seconds, press the ON/STANDBY button on the set
simultaneously at the Power OFF. Although the DVD is connected, the DVD mode cannot be selected.
2. Press both CH UP button on the set and the REC button on the set for more than 2 seconds.
(The BOT, EOT, and the Reel Sensor do not work and the VCR deck can be operated without a cassette tape.)
3. In case of using a cassette tape, press the EJECT button to insert or eject a cassette tape.
Turn on the power and re-check the cable before checking the trouble points.
When you servicing with connection of DVD, perform the operations above step 2 to step 3.

SERVICING FIXTURES AND TOOLS

Back tension cassette gauge
70909103
VTR lubrication kit
JG024A Reel Disk Height
Adjustment Jig
Parts Name
Adapter
Dial Torque Gauge (10~90gf•cm)
Dial Torque Gauge (60~600gf•cm)
Master Plane
Reel Disk Height Adjustment Jig
X Value Adjustment Screwdriver
Up-Date Disc
Tentelometer

PREPARATION FOR SERVICING

Torque cassette gauge
(KT-300NR)
70909199
Grease
JG153 X Value Adjustment
Screwdriver
VSR Torque, Brake Torque (S Reel/T Reel Ass'y)
Brake Torque (T Reel Ass'y)
VSR Torque, Brake Torque (S Reel)
Reel Disk Height Adjustment
Reel Disk Height Adjustment
X Value Adjustment
Up-Date of the Firmware
Confirmation of Tape Tension on Playback
D1-1
Taper nut driver
70909228
JG002B Adapter
JG002E Dial Torque Gauge
(10~90gf•cm)
JG002F (60~600gf•cm)
JG176 Up-Date Disc
Remarks
D-VR5SU/D-VR5SC