Oven Control Functions; Setting Oven Controls - Kenmore 970-3356 Series Use & Care Manual

Gas range
Table of Contents

Advertisement

Oven Control Functions

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with
the various pad functions of the oven as described below.
CLOCK SET
COOK TIME
PAD— Used
PAD— Used to
to set the
enter the length of
time of day.
the baking time.
OVEN INTERIOR
LIGHT PAD— Used to
turn oven interior light
ON or OFF. This pad is
also used to activate
the Cooktop Lockout
feature (some models).
SELECT SELF-CLEAN
PAD— Used to select
the Self-Cleaning
cycle. A 2, 3 or 4 hour
Self-Clean time may be
selected.
TIMER SET/OFF
DELAY START
PAD— Used to set or
PAD— Used to
cancel the minute
set the desired
timer. The minute timer
start time for
does not start or stop
baking & Self-
cooking. Also,
Clean. May be
TIMER SET/OFF pad
used with COOK
is used to set the
TIME to program
Continuous Bake
a delayed bake
feature.
cycle.
*Note: The OVEN indicator light on the electronic display will
turn ON and OFF when using the Bake feature and during
preheat. This is normal and indicates that the oven is cycling
to maintain the selected baking temperature. When the
preheat indicator light turns OFF, your oven is ready.
For a silent control panel
When choosing a function, a beep will sound each time a pad
is pressed. If desired, the control can be programmed for silent
operation. To switch back and forth between normal sound or
silent operation:
Press & hold
. After 7 seconds, the control will beep once.
:SP should appear in the display indicating that the control is in
normal sound mode. Press either
to silent mode (:- - will appear in the display). The silent mode
will block the controls from sounding when a pad is pressed.
To return to normal sound operation, press & hold
seconds :- - will appear in the display. Press either

Setting Oven Controls

Note: The time of day must first be set in order to operate the oven.
To Set the Clock
When the range is first plugged in, or when the power supply to
the range has been interrupted, the display will flash "12:00".
1.
Press
once (do not hold pad down).
FEATURE
UP and DOWN ARROW PADS—
INDICATOR
Used along with the function pads to
LIGHTS— These
select oven temperature, cook time,
light to show
start time (when programming an
which feature is
automatic start time), time of day,
in use.
clean time and minute timer.
OVEN, PREHEAT & DOOR LOCKED LIGHTS* — The "OVEN"
light will glow each time the oven turns on to maintain the set
oven temperature. The "PREHEAT" light will glow when the
oven is first set to operate, or if the desired temperature is reset
higher than the actual oven temperature. The "DOOR LOCKED"
light will flash when the oven door locks and unlocks or when
using the Self-Clean cycle or the oven door lockout is activated.
The indicator light will glow constantly after the door
locks.COOKTOP LOCKED light will glow when the cooktop has
been locked (some models).
or
once to change
. After 7
or
ADD 1 MINUTE —
Use to select Add 1
Minute feature.
once to change back to normal sound mode (:SP will
appear in the display). The control will now provide normal
audible beeps whenever a pad is pressed.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit)
when shipped from the factory. The oven can be programmed
for any temperature from 170°F to 550°F (77°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F
(control should not be in a Bake or Clean mode):
1. Press
. "— —" appears in the display.
2.
Press and hold the
3.
Press and hold
4.
Press the
or
5.
Press any control pad to return to normal operating mode.
2.
Within 5 seconds, press and hold the
correct time of day appears in the display.
Note: The clock cannot be changed during any timed bake
or Self-Clean cycle.
9
BAKE PAD—
Used to select
the bake
function.
BROIL PAD— Used to
select the variable broil
function.
SLOW COOK PAD—
Used to set the Slow Cook
feature.
WARM & HOLD PAD—
Used to set the Warm &
Hold feature.
RECIPE RECALL PAD—
Used to set the Recipe
Recall feature.
STOP/CLEAR PAD—
Used to clear any
function previously
entered except the time
of day and minute timer.
Press STOP/CLEAR to
stop cooking. Also the
STOP/CLEAR pad is
used to activate oven
door lockout setting.
until "HI" appears in the display.
until °F or °C appears in the display.
to change °F to °C or °C to °F.
or
until the

Advertisement

Table of Contents
loading

Table of Contents