Oven Control Functions; Setting Oven Controls; Setting Clock; Setting Silent Or Audible Control Mode - Kenmore 970-5574 Series Use & Care Manual

Oven Control Functions

For satisfactory use of your oven, become familiar with the various key pad functions and features of the oven.
Oven control keypads
1. Oven Light - Use to turn the oven lights ON and OFF and
activate COOKTOP LOCKOUT feature.
2. Clock - Use to set the time of day.
3. Cook Time - Use to enter length of cook time desired.
4. Select Clean - Use to set a 2, 3 or 4 hour self-clean cycle.
5. Timer Set/Off - Use to set or cancel Timer.
6. Delay Start - Use with Bake and Select Clean functions to
program a delay start time or delay start self-cleaning cycle.
7. OVEN indicator light - Will glow each time the oven
turns on to maintain the set oven temperature.
8. PREHEAT indicator light - Glows when the oven is first set
for cooking and remain on until the oven reaches the set
temperature.

Setting Oven Controls

Setting Clock

When the appliance is first powered up or when the power
supply to the appliance has been interrupted, 12:00 will
flash in the display. The time of day must first be set before
operating the oven.
To set the clock:
1. Press key pad once (do not hold key pad down).
2. Within 5 seconds, press and continue pressing the
or key pad until the correct time of day appears
in the display. Release key pad.
Important note:
The time of day cannot be changed when the oven is set
for cooking or when Select Clean is active.
2
3
1
7
7 7
8
8 8
9
4
5 6
10
11 12
11
14
9. DOOR LOCKED indicator light - Glows when the oven
door locks or unlocks, oven lockout is active or when
Select Clean is active.
10. COOKTOP LOCKED indicator light - Glows when the
COOKTOP LOCKOUT feature is active.
11. Up / Down arrow key pads - Use with the function key
pads to accept settings, adjust temperature and times.
12. Bake - Use to select Bake function.
13. Broil - Use to select variable Broil function.
14. STOP - Use to cancel any oven mode previously entered
except clock and timer. Press STOP to stop cooking. Use
to activate or cancel OVEN LOCKOUT.
15. Warm & Hold - Use to set Warm & Hold feature.

Setting silent or audible control mode

The oven control is factory preset with audible tones active.
The control may be programmed for silent operation or
with normal audible tones.
To block the control from sounding when any key pad is
pressed, press and hold Delay Start key pad until the
control beeps once (about 6 seconds).
To return to the audible control mode, press and hold Delay
Start key pad until the control beeps once (about 6
seconds).
11
Function indicator
lights - These lights
located above the
functions will glow
when the function is
13
active.
15