Oven Control Functions - Kenmore 790.7185 Series Use And Care Manual

Oven Control Functions

READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar
with the various pad functions of the oven as described below.
STOP/CLEAR PAD— Used to clear any function
previously entered except the time of day and
minute timer. Press STOP/CLEAR to stop
cooking. Also the STOP/CLEAR pad is used to
activate oven door lockout setting.
BAKE PAD—Used to
select the bake
function.
BROIL PAD—
Used to select the
variable broil
function.
SELF-CLEAN PAD—
Used to select the self-
cleaning cycle.
OVEN, PREHEAT & DOOR LOCKED LIGHTS* — The "OVEN" light will glow each time the
oven turns on to maintain the set oven temperature. The "PREHEAT" light will glow when
the oven is first set to operate, or if the desired temperature is reset higher than the actual
oven temperature. The "DOOR LOCKED" light will flash when the oven door locks and
unlocks or when using the self-clean cycle or the oven door lockout mode is activated. The
indicator light will glow constantly after the door locks.
*Note: The OVEN indicator light on the electronic display will turn ON and OFF when using the Bake feature and
during preheat. This is normal and indicates that the oven is cycling to maintain the selected baking temperature.
When the preheat indicator light turns OFF, your oven is ready.
For a silent control panel
When choosing a function, a beep will be heard each time a pad is pressed. If desired, the controls can be programmed
for silent operation. Press and hold
sounding when a pad is pressed. To return the sound, press and hold
once.
Note: The control will return to the audible mode after a power outage.
Temperature conversion
The electronic oven control is set to operate in °F (Fahrenheit) when shipped from the factory. The oven can be
programmed for any temperature from 170°F to 550°F (65°C to 287°C).
To change the temperature to °C (Celsius) or from °C to °F (control should not be in a Bake or Clean mode):
1. Press . "— —" appears in the display.
2. Press and hold the
3. Press and hold
4. Press the or
5. Press any control pad to return to normal operating mode.
UP and DOWN ARROW PADS— Used along with the
function pads to select oven temperature, cook time, stop
time (when programming an automatic stop time), time of
day, clean time and minute timer.
. After 7 seconds, the control will beep once. This will block the controls from
until "HI" appears in the display.
until °F or °C appears in the display.
to change °F to °C or °C to °F.
TIMER SET/OFF PAD— Used to set or
cancel the minute timer. The minute timer
does not start or stop cooking. Also,
TIMER SET/OFF pad is used to set the
Continuous Bake feature.
again for 7 seconds until the control beeps
9
CLOCK SET PAD— Used
to set the time of day.
FEATURE INDICATOR
LIGHTS— These light
to show which feature is
in use.
COOK TIME PAD— Used
to enter the length of the
baking time (if equipped).
STOP TIME PAD— Used
to set the desired stop
time for baking. Can be
used with COOK TIME to
program a delayed bake
cycle (if equipped).